background image

6

7

KAFFELOGIC - Nano 7.0

KAFFELOGIC - Nano 7.0

THE SMOKE 

The smoke from roasting is no more 
than from cooking many other foods. 
However, it does have a strong smell and 
you should use an air purifier, extractor 
fan or range hood if possible. For best 
results place the appliance directly under 
a range hood. Be aware of where the 
nearest smoke detector is and be ready 
in case it is activated by the smoke.

THE ROAST

A normal roast will take around 8 to 12 
minutes, getting steadily hotter until it 
reaches between 220 and 240 degrees. 
Cool down will then start and this will 
take anything from 4 to 5 minutes. The 
roaster will automatically stop once cool 
down has finished.

EMPTYING THE CHAFF

 

Allow several minutes for the aluminium 
chimney to cool fully. When it has cooled, 
take the lid off the chaff collector, remove 
the aluminium chimney, and empty the 
chaff into the compost. 

You may find you can do several roasts 
before you need to empty the chaff 
collector, but don’t let it fill beyond halfway 
up the mesh. After emptying make sure 
the aluminium chimney is replaced and 
fully seated in the plastic part.

THE FINALÉ

When the roaster has stopped, take off 
the chaff collector. The lower part of the 
chaff collector should be cool enough to 
handle straight away. Pick up the whole 
roaster 

with both hands

. Tip the roasted 

beans into a bowl, jar or bag. You can 
leave the beans in the roaster for some 
time before emptying— it’s ok to roast at 
night, leave the beans in the roaster, and 
bag up the next day.  

Empty coffee beans

Remove aluminium chimney

Empty chaff collector

TOP

BOTTOM

CHAFF COLLECTOR

CHAFF COLLECTOR

Make sure the chaff collector is the 
right way up, the lid is in place and the 
aluminium chimney is fully seated inside 
it (see illustrations below). Operating this 

appliance with the chaff collector upside-
down will result in chaff getting into the 
roasted beans, and spilling on the bench.

Содержание KN1007B












Отзывы: