background image

2

3

KAFFELOGIC - Nano 7.0

KAFFELOGIC - Nano 7.0

Safety continued ...

14. 

May trigger a smoke alarm during normal 
operation

. Ensure that you follow the 

smoke alarm manufacturer’s instructions 
if you need to temporarily disable a 
smoke alarm during the operation 
of the coffee roaster. Do not use this 
appliance in a commercial building where 
smoke detectors may trigger a building 
evacuation or fire service call out.

15. 

The chaff collector becomes too hot 
to touch during roasting

. Wait until the 

cool down part of the roasting cycle has  
finished before removing the chaff collector.

16.  Do not immerse in liquid. Use a damp 

cloth to wipe it down if required. Water 
will damage the electronics. For more 
information on cleaning, see the section 
on ‘Cleaning’ (page 11).

17.  If liquid enters the roast chamber 

or any other part of the appliance, 
unplug the power supply and allow 
24 hours in a warm place for the 
interior of the appliance to dry 
completely before attempting to 
use the appliance again. 

18.  If damaged, the supply cord 

must be replaced by a qualified 
technician.

19.  Do not open the case unless it 

is unplugged from the power 
supply. There are live wires in the 
appliance, so there is a risk of 
electrical shock. 

20. Contact the manufacturer if you 

see persistent error messages on 
the display.

This appliance is not intended for use by persons (including children) with reduced 
physical, sensory or mental capabilities, or lack of experience and knowledge, 
unless they have been given supervision or instruction concerning the use of the 
appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

Check online at kaffelogic.com/support for the latest version of these instructions.

LID

MESH

CHIMNEY

DISPLAY

CONTROLS

CHAFF
COLLECTOR

BASE

PARTS OF THE ROASTER

Содержание KN1007B












Отзывы: