manualshive.com logo in svg

KAESER KCT blue T Series, Руководство оператора

Поделиться
Скачать
KAESER KCT blue T Series Скачать руководство пользователя страница 65

12.4  Transport

12.4.1  Safety

Weight and centre of gravity determine the most suitable method of transportation. The centre of

gravity is shown in the drawing in chapter 13.2.

Please consult with KAESER if you intend to transport the machine in freezing temperatures.

Precondition Transport only by fork truck and only one operated by personnel trained in the safe movement of

goods.

➤ Ensure the danger area is clear of personnel.

12.4.2  Transporting with a forklift truck

Precondition The whole transport pallet is on the forks.

Fig. 18 Transporting with a forklift truck

1. Take note of the centre of gravity.
2. Drive the forks completely under the palette and lift carefully.

12.5  Disposal

Precondition The machine is decommissioned.

1. Remove old filters.
2. Hand the machine over to an authorized disposal expert.

12 Decommissioning, Storage and Transport

12.4 Transport

No.: 902350 00E

Operator manual    Reciprocating compressor  
KCT blue T  

55

Содержание KCT blue T Series



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды