KAESER ASD 25, Руководство по обслуживанию

Страница: 90 / 138

The life of the oil separator cartridge is influenced by:
■ contamination in the air drawn into the compressor,
■ adherence to the changing intervals for:
─ cooling oil
─ oil filter
─ air filter
Material Replacement part
Cleaning rag
Precondition The power supply disconnecting device is switched off
The disconnecting device is locked in the off position
A check has been made no voltage is present
The machine is fully vented, the pressure gauge reads 0 psig.
Fig. 37 Changing the Oil Separator Cartridge
14
Cover
15
Dirt trap
16
Air pipe
17
Retaining screw
19
Nut (self locking)
20
Fitting
21
Gasket
23
Oil separator cartridge
Changing the Oil Separator Cartridge
1. Unscrew the fitting
20
and carefully put the parts to one side, then pull out the copper pipe at
item
15
.
2. Unscrew the nut
19
and turn the air pipe
16
to one side.
3. Remove the cover retaining screws
17
and carefully lift the cover
14
.
4. Take out the old oil separator cartridge
23
together with the gaskets
21
and dispose of these
according to environmental protection regulations.
5. Clean all sealing faces.
6. Insert the new oil separator cartridge with gaskets and screw down the cover.
7. Install a new O-ring and strainer in the dirt trap
15
.
10 Maintenance
10.17 Changing the Oil Separator Cartridge
80
Service Manual Screw Compressor
ASD T Tri-Voltage
9_5721 06 USE