manualshive.com logo in svg

KAESER ASD 25, Руководство по обслуживанию

Поделиться
Скачать
KAESER ASD 25 Скачать руководство пользователя страница 76

10.6.1  Option W1

External heat recovery

➤ Have the external heat recovery system checked annually by authorized KAESER Service rep‐

resentative.

10.6.2  Option W2/W3

Internal heat recovery

Precondition The power supply disconnecting device is switched off.

The disconnecting device is locked in the off position.

A check has been made that no voltage is present.

Leakage

Pressure in the cooling oil circuit is generally higher than that in the heat recovery system. If a leak

occurs, oil will run into the heat transfer medium.
1. Check the heat exchanger visually for leaks.
2. Have an authorized KAESER Service representative check the heat exchanger for internal leaks

at least once a year.

Contamination

➤ Have an authorized KAESER Service representative clean the heat exchanger as soon as a

pressure drop in the heat transfer medium is detected.

10.7  Air Filter Maintenance

Do not clean the air filter element with liquids.
Check that all sealing surfaces match each other. The use of an unsuitable air filter element

can permit dirt to ingress the pressure system and cause damage to the machine.

Material Replacement part

Precondition The power supply disconnecting device is switched off.

The disconnecting device is locked in the off position.

A check has been made that no voltage is present.
The machine has cooled down.

10 Maintenance

10.7 Air Filter Maintenance

66

Service Manual Screw Compressor  
ASD T Tri-Voltage

9_5721 06 USE

Содержание ASD 25











































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды