10 Maintenance
10.1 Safety
Follow the instructions below to ensure safe machine maintenance.
Warning instructions are found before a potentially dangerous task.
Basic safety instructions.
1. Follow the instructions in chapter 'Safety and Responsibility'.
2. Maintenance work may only be carried out by authorized personnel.
3. Before switching on, make sure that:
■ no personnel are working on the machine,
■ all panels are in place and secured.
Working on live components
1. Work on electrical equipment may only be carried out by authorized electricians.
2. Switch off and lock out the power supply disconnecting device and check that no voltage is
present.
Working on pressure systems
1. Close shut-off valves or otherwise isolate the machine from the compressed air system to ensure
that no compressed air can flow back into the machine.
2. Vent all pressurized components and chambers completely.
Working on the drive system
1. Switch off and lock out the power supply disconnecting device and check that no voltage is
present.
2. Replace and secure all enclosure panels before starting the machine.
Further information See chapter 3.4.2 regarding authorized personnel.
See chapter 3.5 regarding dangers and their avoidance.
10.2 Maintenance Schedule
10.2.1 Logging maintenance work
The maintenance intervals given are those recommended for average operating conditions.
➤ Adjust the maintenance intervals with regard to local installation and operating conditions.
➤ Keep a log of all maintenance and service work.
This enables the frequency of individual maintenance tasks and deviations from our recommen‐
dations to be determined.
Further information A prepared list is provided in chapter 10.15.
10 Maintenance
10.1 Safety
50
Assembly and operating manual 2-stage piston compressor
EPC-2-G
No.: 9_5753_04 E
Содержание EPC 1000-2-G
Страница 2: ...Original instructions KKW PEPC 1 04 en SBA KOLBEN AGGREGAT 2 STUFIG...
Страница 6: ...Contents iv Assembly and operating manual 2 stage piston compressor EPC 2 G No 9_5753_04 E...
Страница 10: ...List of Tables viii Assembly and operating manual 2 stage piston compressor EPC 2 G No 9_5753_04 E...