Kaden KMC R32, Руководство пользователя

Страница: 28 / 68

28 | Kaden Owner’s and Controller Manual
2. KMC care and maintenance
Cleaning your indoor unit
BEFORE CLEANING
OR MAINTENANCE
ALWAYS TURN OFF YOUR AIR CONDITIONER
SYSTEM AND DISCONNECT ITS POWER SUPPLY
BEFORE CLEANING OR MAINTENANCE.
CAUTION
Only use a soft, dry cloth to wipe the unit clean. If the unit
is especially dirty, you can use a cloth soaked in warm
water to wipe it clean.
• Do not use chemicals or chemically treated cloths to
clean the unit.
• Do not use benzene, paint thinner, polishing powder
or other solvents to clean the unit. They can cause the
plastic surface to crack or deform.
• Do not use water hotter than 40°C to clean the
front panel. This can cause the panel to deform or
become discoloured.
Cleaning your air filter
WARNING: DO NOT REMOVE
OR CLEAN THE FILTER BY
YOURSELF
Removing and cleaning the filter can be dangerous.
Removal and maintenance must be performed by a
authorised technician.
A clogged air conditioner can reduce the cooling efficiency of
your unit, and can also be bad for your health.
1. Unlock the grille by pushing the two tabs towards the
middle simultaneously.
2. Unplug the display panel cable from the control box on the
main body.
3. Detach the grille from the main unit by holding the grille at a
45° angle, lifting it up slightly and then pulling the
grille forward.
4. Remove the air filter.
5. Clean the air filter by vacuuming the surface or washing it in
warm water with mild detergent.
6. Rinse the filter with clean water and allow it to air-dry.
Do not
let the filter dry in direct sunlight.
7. Reinstall the filter.
8. Reinstall the front grille and reconnect the display panel
cable to the control box on the main body.
Press tabs to
release grille
If using water, the inlet
side should face down
and away from the
water stream.
If using a vacuum
cleaner, the inlet
side should face
the vacuum.