Kaco blueplanet hybrid 10.0 TL3, Руководство пользователя

Страница: 14 / 115

Application note -
Grid standby operation for blueplanet hybrid 10.0 TL3
APL_ Grid_Standby_Operation_for_
blueplanet hybrid 10.0 TL3
Status: 2022-08-08 Page 7 of 8
6 Installation verification for standby power operation
Product description blueplanet hybrid 10.0 TL3
blueplanet hy-switch
I/We confirm that the devices listed above have been properly installed in compliance with the manufacturer's
instructions and the respective laws and standards valid on the installation date, in particular:
 Automatic circuit breaker with 20 A (4-pole) in unit supply line.

Installation of an RCD type B (30 mA) is required for standby power operation.
 The protective earthing must be functional even if the public grid is disconnected.

The shielding of the communication cable between the device and the blueplanet hy-switch must be disconnected
on the blueplanet hy-switch side.
 Reference to generating device with automatic start-up in house distribution
System operator:
Name
First name
Company
Street address
Country / Postcode
City
System site: (if different)
Street address
Country / Postcode
City
Serial numbers / installation date:
Serial numbers blueplanet hybrid 10.0 TL3 Installation date / commissioning
Serial numbers blueplanet hy-switch Installation date / commissioning
Installer:
Company
Authorised representative (first name/last name)
Street address
Country / Postcode
Telephone
E-mail
City Date Signature Company stamp