Kaco blueplanet hybrid 10.0 TL3, Руководство по эксплуатации

Страница: 52 / 59

EN
blueplanet hybrid 10.0 TL3
Page 52
E120 Self-test
Initialisation error Check the operating conditions, and contact the service tech-
nician if necessary.
E130 General fault Inform the service technician in case of repeated faults.
E140 General fault Inform the service technician in case of repeated faults.
E150 Self-test
Initialisation error Check the operating conditions, and contact the service tech-
nician if necessary.
E160 General fault Inform the service technician in case of repeated faults.
E170 Monitoring stop May occur during a software update If this error occurs fre-
quently during operation, please inform the service technician.
E180
E181
E182 Self-test
Initialisation error Inform the service technician in case of repeated faults.
E190
E191 Battery service General battery fault. Please check the battery fault log for the
exact cause of the fault.
E200 General fault Inform the service technician in case of repeated faults.
E211 EEPROM
Initialisation error The configuration data of the device cannot be read from
EEPROM. Inform the service technician in case of repeated
faults.
E220 Self-test
Initialisation error
Inform the service technician in case of repeated faults.
E230 General fault Inform the service technician in case of repeated faults.
E9xxx General fault Inform the service technician in case of repeated faults.
9.3.3 List of displayed information
Information indicates limitations in device functions.
Code Meaning Explanation / recommendation
I001 Heat sink temperature The temperature of the heat sink is too high. The power
is reduced. Check the installation.
I002 Temperature of hy-switch The internal temperature of hy-switch is too high. Check
the installation.
I003 Battery temperature The battery temperature is too high. The battery power
is reduced.
I010 Power reduction The energy supplier has reduced the power of the de-
vice. Wait until the power setting changes.
I031
I032
Deactivation by button Device has been switched off by button.
I040 Battery charge balancing The connected batteries have very different states of
charge. Charge balancing of the battery is recom-
mended.
I121 Supply settings The setting of Pav,e is lower than P_feed_in_limit. Check
the settings in the device.