Kaco blueplanet 110 TL3 M1 WM OD IIK0, Руководство по эксплуатации

Страница: 17 / 268

D
A
C
A
B
1
2
3
4
5
6
6 1/32"
2 61/64"
Fig. 10: Minimum clearances for wall mounting
1
6
5
10.63 In
18.70 In
18.70 In
10.63 In
1)
1)
41.97 In
18.03 In
21.65 In
17.83 In
1543 mm
2)
1)
1)
Fig. 11: Wall mounting
Legend
1 Mount 4 Screw for mounting (4x) [SW 13 / Fastening the
mount [See section 6.3
} Page 16]]
2 Fixings for mounting [S12 – Ø 12mm/ 90mm]* 5 Securing screw (1x)
3 Lock washer 6 Lug to mount the device
A Minimum clearance: 120
1)
Minimum clearance excluding device:270
Recommended clearance: 400
1)
Recommended clearance excluding device: 475
B Minimum clearance: 300 - -
C Minimum clearance: 500 - -
D Recommended clearance: 1000 ²) Recommended clearance with DC breaker: 1543
↻
Cardboard packaging with mount and mounting kit removed from the packaging and opened.
1 Mark the mounting position on the wall surface according to the position of the mount by drawing a line.
2 Mark the positions of the drill holes using the slot in the mount.
NOTE: The minimum clearances between two devices, or the device and the ceiling/floor have already been taken
into account in the diagram.
3 Fix the mount to the wall using suitable mounting fixtures from the mounting kit.
NOTE: Make sure that the mount is oriented correctly.
» Proceed with the installation of the device.
6.4 Installing and securing the device
CAUTION
Risk of injury from improper lifting and transport.
Lifting the device improperly can cause the device to topple and fall over.
› Only ever raise the device vertically using the openings provided.
› Use a climbing aid for the chosen installation height.
› Wear safety gloves and safety shoes when lifting and lowering the device.
KACO blueplanet 87.0 TL3 KACO blueplanet 92.0 TL3 KACO blueplanet 110 TL3 KACO blueplanet 125 TL3
KACO blueplanet 137 TL3 KACO blueplanet 150 TL3
Page 17
EN-US