Problem:
After decreasing the computer display resolution, some of the control software’s pop-
up windows do not appear on the screen.
Solution:
The control software remembers the screen Iocation of the Band Sweep Display, Smith
Chart, Log Call sign and
User
Guide pop-up windows. This data is stored in the file
KC505.CFG. If these windows
last
appeared on the right
or
bottom
of
the screen and you
change the screen resolution from large, say
I024
x
768,
to
small, say 640
x
480, these
windows
Will be
off
the right
or
bottom
of
the screen.
To prevent this problem, move these
windows left and up before decreasing the screen resolution.
If the problem has already
occurred, restore the screen resolution
to
the previous setting, move the windows, and then
decrease the resolution again.
As
a
last
resort,
quit the KC505 program, delete the
KC505.CFG file, then
restart
the KC505 program. The window positions Will return
to
the
default locations.
Problem:
How
do I reset the radio
to
factory settings?
Solution:
If the radio settings are in a questionable state, click the RESET button while in the
KC505
control program. This Will restore the following parameters
to
factory default settings.
AGC
speed
Am
pl
ifie r
Audio volume
Bandpass filter
CW
offset frequency
CW
filter default
CW keyer dynamics
CW
keyer mode
CW
keyer speed
CW keyer side tone
CW
keyer QSK
CW
keyer weight
IF
shift frequency
Level sensitive squelch
Mode
MIC gain
Notch width
Notch frequency
Noise reduction off/on
Noise
reductiorn level
P
ream
pl
ifi
e r off/o
n
RX
attenuator
RX
frequency tune
RX
incremental tuning
(RIT)
offset
Speech compression
Speech monitorSpeech processor off/on
Squelch on/off
TX
equalization frequency
TX
frequency tune
TX
power output
VFO
VOX delay
V O X level
Antivox level
Note that memory functions, such
as
memory channels, snapshot keys call sign data Will not be
lost
if
you click the
RESET
button.
and
Guide
Page
I 7
