Kabola B-8, Руководство пользователя

Страница: 11 / 20

Use r ma nual Ka bola B-serie, 1-4-2005
11
Figure 11
Figure 12
4.1.7 Connecting the oil filter and oil burner
To connect the filter to the boiler follow the procedure below (see also figure 11)
1. Remove the burner cover (1);
2. Connect the oil pump (2) to the oil-filter (3), using
the included fuel hoses. Make sure that
the flow directions on the pump comply with
those on the filter.
3. Connect the fuel line from the tank to the filter
(5A). The fuel line must have a outer diameter of
8mm and must be made from copper or steel.
The fuel has to be connected directly to the oil
tank. Correct functioning of the burner can not
be guaranteed when a fuel manifold or T-
connection is installed.
4. Connect the plug (4) from the boiler to the
burner.
Hint:
When the oil tank is situated below the boiler or
when the oil supply line comes from below the boiler, it is
advisable to use a self bleeding oil filter. This prevents
unnecessary malfunctioning of the burner
(see figure 12).