Kaba Simplex, Инструкции по установке

Страница: 8 / 24

8
C Co om mb biin na at tiio on n C Ch ha an ng giin ng g P Pr ro oc ce ed du ur re e
The door m mu us st t b be e o op pe en n.
1) Insert the control key into the lock and turn it 90° to the
right (clockwise) to the horizontal position (see Figure 6-1)
to unlock the front lock assembly from the mounting
bracket.
2) Remove the front lock assembly from the mounting
bracket by pulling it away from the door.
3) While holding the lock in your hand, turn the knob to the
left (counterclockwise) to the stop position and release.
4) Enter the existing combination. Make sure you depress
each button fully and release.
Note: For new installations, factory code is 2 & 4 pressed
together, release, then 3 and release.
5) Use your finger to depress the lockout slide as shown in
Figure 6-2 (a slight click should be felt).
6) Rotate the turn knob to the left (counterclockwise) to the
stop position to clear the old combination, then release.
7) Depress the buttons of your new combination and
release; a slight click should be felt when depressing each
button.You can easily set a new combination using any or
all buttons, in any order, separately and/or pushed at the
same time as other buttons. You cannot use the same
button more than once in a combination.
8) Turn the knob to the right (clockwise) to the stop position to activate the new
combination and release.
9) Remount the front lock assembly by aligning the lock-in studs of the
mounting bracket with the mating holes of the front lock assembly lock-in
plate.
10) Turn the control key to the left (counterclockwise) to the vertical position. The
front lock assembly is now locked in place.
11) Enter the new combination and rotate the turn knob to the right (clockwise) and
hold. Make sure that the panic device latch is fully retracted; then release the
turn knob.
Figure 6-1.
Control key insert
Figure 6-2.
Depress
lockout
slide
Combination # Date
COMBINATION SETTING RECORD