K-PO HM380 Скачать руководство пользователя

Страница: 41 / 47

61A 156.075

156.075

U.S. Government only

63A 156.175

156.175

Port Operations and Commercial, VTS. Available only in

New Orleans / Lower Mississippi area.

64A 156.225

156.225

U.S. Coast Guard only

65A 156.275

156.275

Port Operations

66A 156.325

156.325

Port Operations

156.375

Commercial. Used for Bridge-to-bridge communications

in lower Mississippi River. Intership only. 6

156.425

Non-Commercial

156.475

Non-Commercial

156.575

Non-Commercial

156.625

Non-Commercial (Intership only)

156.675

Port Operations

156.725

Port Operations

156.875

Port Operations (Intership only) 5

78A 156.925

156.925

Non-Commercial

79A 156.975

156.975

Commercial. Non-Commercial in Great Lakes only.

80A 157.025

157.025

Commercial. Non-Commercial in Great Lakes only

81A 157.075

157.075

U.S.Government only – Environmental protection

operations.

82A 157.125

157.125

U.S. Government only

83A 157.175

157.175

U.S. Coast Guard only

157.225

161.825

Public Correspondence (Marine Operator)

157.275

161.875

Public Correspondence (Marine Operator)

157.325

161.925

Public Correspondence (Marine Operator)

157.375

161.975

Public Correspondence Marine Operator)

157.425

162.025

Public Correspondence only near Canadian border

88A 157.425

157.425

Commercial, Intership only

• Recreational boaters normally use channels listed as Non-Commercial: 68, 69, 71, 72, 78A.

• Channel 70 is used exclusively for Digital Selective Calling (DSC) and is not available for regular

voice communications.

• Channels 75 and 76 are reserved as guard bands for Channel 16 and are not available for regular

voice communications.

Notes:

1. The letter “A” following a channel number indicates simplex use of the ship station transmit

side of an international semi-duplex channel. Operations are different from that of international

operations on that channel.

2. Channel 13 should be used to contact a ship when there is danger of collision. All ships of

length 20 meters or greater are required to guard VHF channel 13, in addition to VHF channel 16,

when operating within U.S. territorial waters.

3. Channel is Receive Only.

4. Channel 16 is used for calling other stations or for distress alerting.

5. Output power is fixed at 1 watt only.

—

Содержание HM380
















































Результаты поиска

Содержание HM380

Отзывы:

Похожие инструкции для HM380

Бренды по названию

Популярные бренды

K-PO HM380, Руководство пользователя

Результаты поиска

Содержание HM380

Отзывы:

Похожие инструкции для HM380

Бренды по названию

Популярные бренды