function. Toggling the Weather Alert function ON/OFF will toggle the icon “WAT” accordingly.
When Weather Alert function is enabled, every 4 seconds the last used weather channel should be
checked for weather alert tone when the radio is tuned to working channel. With Weather Alert
Function enable, once the alert tone is detected, the “WX” and “WAT” symbols should flash and a
short alarm tone will be sounded. The radio would automatically tune to the current monitor WX
channel where the weather alert has been detected. The alert should be detected in all the modes of
Dual/Tri-watch, Scan and Standby operation etc.
6.Other Features and Solutions
Special function keys
First press and hold “DISTRESS” key for more than 3 seconds, then press Power key, you can
enter the up grade mode directly. LCD display as below:
The
software’s
Upgrading
by
PC
Please wait----
First press and hold PTT key on the fist microphone for more than 3 seconds, then press Power
key, later you can enter the writing channel mode directly. LCD display as below:
The Private
Channels are
Cloning by PC
Please wait---
TX Time Out
The transmission will be automatically turned off after PTT key pressed over 5 consecutive
minutes. The TX mode will be terminated and back to Rx mode. Once the PTT key is released, the
TX time out timer will be reset. PTT key will back to work normally.
The Local Time & Date on Screen:
—
28
—
