K-PO HM380 Скачать руководство пользователя

Страница: 1 / 47

HM380/HM380C/HM380S User Manual

RF Radiation Information

RF Radiation Profile

Your radio is designed and tested to comply with a number of national and international standards and

guidelines (listed below) regarding human exposure to radio frequency electromagnetic energy. This

radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure

environment at operating duty factors of up to 50% transmitting .In terms of measuring RF energy for

compliance with the FCC exposure guidelines, your radio radiates measurable RF energy only while it is

transmitting (during talking in PTT mode), not when it is receiving (listening) or in standby mode.

The device complies with SAR and/or RF field strength limits of RSS-102 requirement

RF Radiation Safety

n order to ensure user health, experts from relevant industries including science, engineering, medicine

and health work with international organizations to develop standards for safe exposure to RF radiation.

These standards consist of:

United States Federal Communications Commission, Code of Federal Regulations; 47CFR part 2

sub-part J;

American National Standards Institute (ANSI)/Institute of Electrical and Electronic Engineers (IEEE) C95.

1-1992;

Institute of Electrical and Electronic Engineers (IEEE) C95. 1 – 1999;

International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998;

FCC Regulations

Federal Communication Commission (FCC) requires that all radio communication products should meet

the requirements set forth in the above standards before they can be marketed in the U.S, and the

manufacturer sHAIL post a RF label on the product to inform users of operational instructions, so as to

enhance their occupational health against exposure to RF energy.

Part 15 Compliance

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

●

Reorient or relocate the receiving antenna.

●

ncrease the separation between the equipment and receiver.

●

Connect the equipment into an outlet on a circuit different from that to which the receiver

connected.

●

Consult the dealer or an experienced radio/TV technician for help. Note:“Changes or modifications to

—

Содержание HM380
















































Результаты поиска

Содержание HM380

Отзывы:

Похожие инструкции для HM380

Бренды по названию

Популярные бренды

K-PO HM380, Руководство пользователя

Результаты поиска

Содержание HM380

Отзывы:

Похожие инструкции для HM380

Бренды по названию

Популярные бренды