Operating instructions K-Laser Blue Dental Rev. ZE
Page 34 of 72
The explanation of the impulse profile on the screen is described into more details.
The impulse is displayed in light blue.Horizontal line and
numerical value on the right represent the average power that the
device automatically calculates.
If ISB modality is on, a bar with red profile (970nm emission) is
present on the base among the impulses.
If ISB modality is off the bar doesn't appear.
If DISB modality is on, a yellow part is present over the light blue
impulse. Maximum emissive power of 445 nm and 970 nm
combined. If DISB modality is off, the part doesn't appear.
It allows to select wavelengths, in single or combined modality.
445nm selected: the impulse is light blue.
970nm selected: the impulse is yellow.
445nm + 970nm selected: the impulse is violet.
The explanation of the following icons is described into more details.
The following phases can be selected:
Deep, Surface, Finish, Haemostasis or CW.
The selected phase has a green background.
If the - / + keys are pressed, the peak power can decrease or increase, varying
also the average power of the emission.
After selection of the following areas:
Vascular surgery
and
Dark spots
the following screen is
displayed.
Different levels of the red aiming beam can be
defined.
Graphic of the laser impulse.
Wavelength selector. Press it to select needed
wavelengths, in individual or combined way.
Energy of each emitted impulse.
Speed: number of impulses emitted in a second.
ISB modality. It is on if the green bar is present.
Press it to save a treatment.
Press it to go back one screen.
Press it to enter a manual screen. User confirmation
is needed.
Laser armed. After a delay of 2 seconds by this
button pressure, the aiming beam is switched on and
the laser is ready to be used.