![background image](http://html1.mh-extra.com/html/k-laser/blue-dental/blue-dental_operating-instruction_648445017.webp)
Operating instructions K-Laser Blue Dental Rev. ZE
Page 17 of 72
4.4 Optic fiber with connector
The device is supplied ready to be used. The operator is able to perform needed treatment simply
plugging an handpiece to the connector.
Optic fiber with connector
Notice
The user can attach an handpiece, simply plugging it to the connector.
When attaching or detaching the parts, we recommend to slightly rotate the two parts. The
rotation of the two parts makes the operation easier.
Attach
Detach
The user must hear a sound (click) locking the parts. This guarantees a correct connection.
Notice
Clean the lens of the connector with a dry, soft cloth. Please proceed carefully not to scratch
and damage the components.
Caution
Always cover the connector with the special protective cap. Make also sure that no dust or dirt
enter the connector. Otherwise the unit may be permanently damaged. Use a soft cloth to
clean it.
Caution
Always cover the connector and the optic fiber with the special protection caps if the fiber is
dismounted to make sure that no dust or dirt can enter inside. Otherwise the unit may be
permanently damaged.
Caution
Always cover the connector with the special protective caps provided for this purpose after the
removal of an handpiece.
Initial check
Caution
Prevent dust, dirt and foreign particles from entering the optic system.
Make sure that the optic system is always cleaned: before, during and after the use.
Warning
Do not use the device if the aiming beam is not visible. If the aiming beam projects no pattern
at all, check that the eventual deactivation. Adjust the aiming beam brightness in the surgical
area.