JYTEK USB-62405 Скачать руководство пользователя

Страница: 11 / 58

Introduction

1 Introduction

1.1 Overview

The USB-62405 is a 24-bit high-performance dynamic signal acquisition

USB module, equipped with 4 simultaneous-sampling analog input

channels sampling up to 128 kS/s per channel. The USB-62405 also fea

tures software selectable AC or DC coupling input configuration, and

built-in high precision 2 mA excitation current to measure integrated

electronic piezoelectric (IEPE) sensors such as accelerometers and

microphones.
The USB-62405 delivers high precision DC and dynamic measurement

performance with very low temperature drift. The onboard 24-bit

Sigma-Delta ADC supports anti-aliasing, which suppresses modulator

and signal out-of-band noise and provides usable signal bandwidth of

the Nyquist rate, making it ideal for high dynamic range signal measure

ment in vibration and acoustic applications.
The USB-62405 supports digital and analog trigger sources and flexible

trigger modes, including post, delay, middle, gated, and pre-triggering,

which acquires data efficiently without post processing. The USB-62405

is USB bus powered and equipped with BNC connectors and removable

spring terminals for easy device connectivity.

1.2 Features



Hi-Speed USB 2.0



USB bus powered



24-bit Sigma-Delta ADC with built-in anti-aliasing filter



4-CH simultaneous sampling analog input, up to 128kS/s



AC or DC input coupling, software selectable



Analog or digital triggering



Supports 2mA excitation output on each analog input channel for

IEPE sensor measurement



Full auto-calibration



Ready-to-use testing application (U-Test) provided

Содержание USB-62405



























































Результаты поиска

Содержание USB-62405

Отзывы:

Похожие инструкции для USB-62405

Бренды по названию

Популярные бренды

JYTEK USB-62405, Руководство пользователя

Результаты поиска

Содержание USB-62405

Отзывы:

Похожие инструкции для USB-62405

Бренды по названию

Популярные бренды