JYTEK PXIe-63985 Скачать руководство пользователя страница 37

Страница: 37 / 40

Item

Detail

BIOS Information

Includes BIOS version and the date on which

the BIOS was built

System Date & Time

System Date

Changes system date, date must be entered

in MM/DD/YY format

System Time

Changes system time, time must be entered

in HH:MM:SS format.

MAC Address

The MAC address of Ethernet ports

Access Level

Displays current access level, default is

Administrator

LINK CAP

The PXI express link capability

Processor Information

Includes detail CPU information.

PCH Information

Includes chipset information

Item

Detail

System Management

Includes manufacturing information and

runtime statistics

Table B-2: BIOS Main Setup Menu

B�3 Advanced Setup

Select the Advanced tab from the setup screen to enter the Advanced BIOS Setup screen.

You can select any of the items in the left frame of the screen, such as SuperIO Configuration,

to go to the submenu for that item. Display an Advanced BIOS Setup option by highlighting

it using the < Arrow > keys. The Advanced BIOS Setup options are as follows.

Item

Detail

Holdoff Timer

Delay setting for PCIe discovery in seconds

Launch PXE

OpROM

Enables or disables legacy network device (default is

Disabled)

Launch Storage OpROM

Enables/disables the option for Legacy Mass Storage

Devices with option ROM (default is Enabled)

PCIe Performance

Enable or disable the EIST/Turbo/C-state (default is

disabled)

CPU

Displays processor type, speed, system bus speed, etc.

Memory

Displays memory type, speed, voltage rail, etc.

Graphics

Displays VBIOS version, and graphic memory setting

SATA Configuration

Sets SATA mode and enables/disables SATA controller

USB Configuration

Provides USB support and lists the devices attached to the

USB port (keyboard, mouse, and one hub)

PCI and PCIe

PCI and PCIe related setting, including enable the 4G

memory space supporting for peripheral module

Hardware Health

Configuration

Displays voltages and temperatures on the controller

Содержание PXIe-63985









































Результаты поиска

Содержание PXIe-63985

Отзывы:

Похожие инструкции для PXIe-63985

Бренды по названию

Популярные бренды

JYTEK PXIe-63985, Руководство пользователя

Результаты поиска

Содержание PXIe-63985

Отзывы:

Похожие инструкции для PXIe-63985

Бренды по названию

Популярные бренды