14
Read the release notes and installation documentation provided by the operating
system vendor. Be sure to read all the README files or documents provided on the
distribution disks, as these typically note documentation discrepancies or
compatibility problems.
1. Select the appropriate boot device order from the BIOSBoot Setup Menu based on
the OS installation media used. For example, if the OS is distributed on a bootable
installation CD, select USB CD-ROM as the first boot device and reboot the system
with the installation CD in the USB CD-ROM drive
2. Proceed with the OS installation as directed and be sureto select appropriate device
types if prompted. Refer to the appropriate hardware manuals for specific device
types and compatibility modes of JYTEK PXI products.
3. When installation is complete, reboot the system and setthe boot device order in the
SETUP boot menu accordingly.
2.2.1 Installation Environment
When preparing to install any equipment described in this manual, please refer to Chapter
: Important Safety Instructions.
Only install equipment in well lit areas on flat, sturdy surfaces with access to basic tools
such as flat- and cross-head screwdrivers, preferably with magnetic heads as screws and
standoffs are small and easily misplaced.
Recommended Installation Tools
• Phillips (cross-head) screwdriver
• Flat-head screwdriver
• Anti-static wrist strap
• Anti-static mat
JYTEK PXIe-63985 system controllers are electrostatically sensitive and can be easily
damaged by static electricity. The equipment must be handled on a grounded anti-static
mat, and operators must wear an anti-static wristband, grounded at the same point as the
anti-static mat.
Inspect the carton and packaging for damage. Shipping and handling may cause damage to
the contents. Ensure that all contents are undamaged before installing.
All equipment must be protected from static discharge and physical shock. Never
remove any of the socketed parts except at a static-free workstation. Use the
anti-static bag shipped with the product to handle the equipment and wear a
grounded wrist strap when servicing or installing.
2�2�2 Installing the PXIe-63985
1. Locate the system controller slot (Slot 1)
2. Depress the red locking lever and release the latch
