GETTING STARTED
Voice Activated Recording (VAR)
The Voice Activated Recording (VAR) feature means that with VAR
activated the unit is recording only when a sound (voice) activates
recording. When there is no sound (voice), the unit will not record.
1.
Press and hold
OK / MENU
for two (2)
seconds to enter menu.
2. Repeatedly
press
or
until “VAR ON” or “VAR OFF”
flashes on the screen.
3. Press
VOL +
or
VOL -
to choose VAR OFF or VAR ON.
4. Press
OK / MENU
button to confirm and go to next menu.
5. Press
or
to go to next menu or press
STOP
to exit
menu.
While recording with VAR turned on, use
VOL +
and
VOL –
to
adjust the sensitivity level for voice activation (LOW, MID, HIGH).
The sensitivity level determines the amount of sound necessary to
trigger recording (ie. HIGH: Recording begins with slight sound,
while LOW: Recording requires louder sound).
Note:
When no sound triggers the VAR for three (3) seconds,
recording will stop until sound triggers activation again.
Using VAR
1. Press
REC
to activate the VAR function. Recording begins automatically unless there
is no sound for more than three (3) seconds.
2.
During recording, the LED indicator will remain lit steadily.
3.
To stop recording, press
STOP
.
Play One / All Files
1.
Press and hold
OK / MENU
for two (2)
seconds to enter menu.
2. Repeatedly
press
or
until “PL ONE” or “PL ALL” displays and flashes (if PL ONE is
previously selected, “PL ONE” will be displayed. If PL ALL is
previously selected, “PL ALL” will be displayed).
3. Press
VOL +
or
VOL -
to choose PL ONE or PL ALL.
4. Press
OK / MENU
to confirm and go to next menu.
5. Press
or
to go to next menu or press
STOP
to exit
menu.
Choose PL ONE to play one (1) recorded file. Choose PLAY ALL to
play all files in the folder beginning with the first one.
