JVC XL-R2010BK, Инструкция по эксплуатации

Страница: 27 / 47

25
Engli
s
h
5
Press the SET button.
“DISC DUBBING” is shown in the information display.
•
When a blank disc is in the CDR tray, “UPDATE OPC” is
shown following “DISC DUBBING”.
The CD player and CDR start simultaneously.
•
Recording starts from the first track of the CD.
When recording completes, “STOP DUBBING” flashes and
recording automatically stops.
Notes
• Recording can only start if the total time of the tracks on the
source disc is less than the time remaining on the disc being
recorded to. If the track time on the source disc is longer, the
message “SHORT REMAIN” is shown in the information dis-
play and the dubbing function is ended.
• If a track on the source disc is of SCMS format, the message
“SCMS PROTECT” is shown in the information display, and
the dubbing function is ended.
• Do not finalize the disc.
Selected tracks can be programmed and recorded.
1
Stop the CD to be recorded.
2
Load a recordable CD-R or CD-RW in the CDR
tray.
• The disc is read.
• The default setting is for the CD to be recorded digitally. If you
press the REC SOURCE SELECTOR button and select CD
ANALOG you can also record the CD using analog sound. You
can listen to the source when recording using analog sound, but
you cannot use high-speed recording.
• When recording SCMS (see page 41) discs, the disc is recorded
using analog sound.
3
Press the CD EDIT button (main unit/remote
control) to select the Listening Edit mode.
“LISTEN EDIT” is shown in the information display for 3 seconds,
the L EDIT edit recording indicator is shown in the display window.
• The CD tray of the CD player cannot be opened once the listen-
ing edit mode is activated.
• If track have already been programmed for the CDs, “LAST L-
PG OK?” is shown in the information display. Press the SET
button on either the remote control or the main unit or press the
PLAY button on the main unit to record the same programmed
tracks.
Recording starts.
To program new tracks, press the CANCEL button and then
proceed to step 4.
4
Program the tracks while the CD is playing by
assigning a tag to each track on the disc.
• This is done by pressing either the SET button (main unit/
remote control) to add the track to the program or the CANCEL
button (main unit/remote control) to skip the track.
a. When the track now playing is to be recorded
b. When the track is not to be recorded
When the first track has been stored in memory
After making the last programming choice, “START TO DUB?” is
shown in the information display. Press the SET button (main unit/
remote control) to continue or the CANCEL button (main unit/
remote control) to end the function.
(To be continued on the next page)
Listening Edit Recording
STANDBY
STANDBY/ON
MAX MIN
LEVEL PHONES
PLAY MODE CD EDIT
REC SOURCE
SELECTOR
CD REC
STOP PLAY PAUSE
REC SOURCE
DIGITAL CD LINE MIC
OPEN/CLOSE OPEN/CLOSE
XL-R2010 CD/CDR MULTIPLE COMPACT DISC RECORDER
CANCEL SET MENU
PAUSE REC/REC MUTING PLAY STOP
SYNCHRO
FINALIZE
MULTI JOG/REC LEVEL
+ –
MIX BLANCE
CD
LINE
LINE
MIC
MIC
2
3 4 1
CANCEL
5
STANDBY/ON
CD REC
PLAY
MODE
•
REC
REC MUTING
REC
SOURCE
MENU
PITCH
0 CAN
CEL
REPEAT CD
PITCH +
SET
PITCH–
RM–SXLR2010A
REMOTE CONTROL
CDR
CD EDIT FINALIZE DISPLAY
1 2
4 5
7 8
3
6
9
10 +10
FADE SYNCHRO
C O N T R O L
1
4
3
CANCEL
5
CD EDIT
CD EDIT
Remote Control Main Unit
The track is stored in the memory, and
operation moves on to the next track.
SET
CANCEL
The track is not stored in the memory,
and operation moves on to the next
track.
2 3 4
5 6 7 8
9 10 11 12
DIGITAL
44.1 kHz
CD L EDIT C D - R
SYNC 4X AUTO TRACK
L
R
– 40 30 20 10
dB
6 3 0
Play time of second track
Recording time remaining on the
CD-R/RW disc (pre-calculated)
“1” is cleared from the music calendar.
Eng.book Page 25 Monday, May 28, 2001 9:46 AM