JVC V.Networks VN-C10 Скачать руководство пользователя страница 72

Страница: 72 / 78

Operations (Step 6 Operations with a Web Browser)

6-4 Settings with a Web Browser (5. FTP Settings) (Continued)

Caution

●

The settings performed here are not saved if the FTP function is not enabled.

Item

Effect

FTP Function

Select [Available] to enable this function.

Username

Enter the user name (up to 16 characters) to be used for
verification with the FTP server.

Password

Enter the password (0 to 32 characters, shown as asterisks
“*”) to be used for verification with the FTP server.

Host IP Address

Enter the IP address of the FTP server to which images are
uploaded.

FTP Port

Enter the port number of the FTP server to which images are
uploaded.

FTP Folder

Enter the folder name in the FTP server to which images are
uploaded.

Upload Interval

Set the interval (0 to 84600 seconds) at which images are
uploaded to the FTP server.

Disconnect every time

If this is selected, connection is cut off every time an image
has been uploaded.

Connection will be reestablished

when the next image is uploaded

Error Recovery

Specify the action to be taken when an FTP error has oc-
curred.

On connect error

Specify the action to be taken when an error with TCP con-
nection or FTP verification has occurred.

Retry forever

Error recovery is attempted until the power to VN-C10 is dis-
connected.

Retry for * min

Error recovery is attempted for a specified period of time (1
to 600 minutes).

On transfer error

Specify the action to be taken when a file transfer error has
occurred during image uploading.

Stop Uploading

With the occurrence of a transfer error, the VN-C10 FTP func-
tion is automatically disabled. Select here to enable the func-
tion again.

Filename

Specify the file name of the image to be uploaded.

*.jpg

Image upload is performed with the name entered in this
field.

As images are uploaded under this same name,

only one image file remains in the FTP server. (Images
are overwritten with the latest one.)

Timestamp

The current time is obtained from the NTP server. Images
are uploaded with the thus obtained times as their file names
(YYYY-MM-DD-HH-MM-SS-mmm).

Because each image is uploaded with a different file
name, all uploaded images are saved in the FTP server.

VN-C10_E_62-78.pm65e

08/01/03, 9:17 AM

Содержание V.Networks VN-C10















































































Результаты поиска

Содержание V.Networks VN-C10

Отзывы:

Похожие инструкции для V.Networks VN-C10

Бренды по названию

Популярные бренды

JVC V.Networks VN-C10, Инструкция по эксплуатации

Результаты поиска

Содержание V.Networks VN-C10

Отзывы:

Похожие инструкции для V.Networks VN-C10

Бренды по названию

Популярные бренды