JVC UX-QD70S Скачать руководство пользователя страница 18

Страница: 18 / 99

1-18 (No.MB496)

3.1.20 Removing the DVD mechanism assembly

(See Fig.23)

• Remove the rear cover(B), side panels(L)/(R), top cover as-

sembly, heat sink(B), main board, regulator board, trans
board, CD mechanism bracket and joint board.

(1) From the top side of the main body, remove the screw

at-

taching the DVD mechanism assembly.

(2) Take out the DVD mechanism assembly from the main

body.

Note:

When removing the DVD mechanism assembly, be careful not
to damage the lower board and parts.

Fig.23

3.1.21 Removing the LCD board

(See Fig.24)

• Remove the rear cover(B), side panels(L)/(R), top cover as-

sembly and front panel assembly.

(1) From the inside of the front panel assembly, remove the

three screws

attaching the LCD board.

(2) Take out the LCD board from the front panel assembly.

Note:

When attaching the LCD board, be careful not to damage the
LCD panel.

Fig.24

DVD mechanism assembly

LCD board

Содержание UX-QD70S




































































































Результаты поиска

Содержание UX-QD70S

Отзывы:

Бренды по названию

Популярные бренды

JVC UX-QD70S, Руководство по обслуживанию

Результаты поиска

Содержание UX-QD70S

Отзывы:

Бренды по названию

Популярные бренды