G-2
CAUTION: Proper Ventilation
To avoid risk of electric shock and fi re, and to prevent damage, locate the apparatus as follows:
1. Front: No obstructions and open spacing.
2. Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.
3. Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a
height of 10 cm or more.
Front view
Side view
SP-UXE8DAB
CA-UXE8DAB
SP-UXE8DAB
CA-UXE8DAB
IMPORTANT for the U.K.
DO NOT
cut off the mains plug from this equipment. If the plug fi tted is not suitable for the power points in your
home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or
consult your dealer.
BE SURE
to replace the fuse only with an identical approved type, as originally fi tted.
If nonetheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a
possible shock hazard by inadvertent connection to the mains supply.
If this product is not supplied fi tted with a mains plug then follow the instructions given below:
IMPORTANT:
DO NOT
make any connection to the terminal which is marked with the letter E or by the safety earth symbol or
coloured green or green-and-yellow.
The wires in the mains lead on this product are coloured in accordance with the following code:
Blue: Neutral
Brown: Live
As these colours may not correspond with the coloured markings identifying the terminals in your plug proceed as
follows:
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured
black.
The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured
red.
IF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN.
EN_Safety_UXE8DAB_B.indd 2
EN_Safety_UXE8DAB_B.indd 2
07.5.11 4:20:02 PM
07.5.11 4:20:02 PM
