JVC TH-M65 Скачать руководство пользователя страница 12

Страница: 12 / 42

1-12 (No.MB112)

3.1.9

Removing the connect board
(See Fig.14)

• Prior to performing the following procedures, remove the metal

cover and front panel assembly.

(1) From the inside of the front panel assembly, disconnect the

card wire from the connector

CN561

on the connect board.

(2) Remove the screw

attaching the support board.

(3) Take out the connect board.

Fig.14

3.1.10 Removing the phone jack board and microphone volume board

(See Figs.14,15 and 17)

• Prior to performing the following procedures, remove the metal

cover and front panel assembly.

(1) From the front side of the front panel assembly, pull out the

microphone volume knob. (See Fig.17.) [US/UW/UG
version]

(2) From the inside of the front panel assembly, remove the

two screws

attaching the phone jack board. (See

Fig.14.)

(3) Take out the phone jack board together the microphone

volume board. [US/UW/UG version]

(4) Take out the phone jack board. [UJ version]
(5) From the forward side of the phone jack board, disconnect

the wire from the connector

CN702

on the phone jack

board. (See Fig.15.) [US/UW/UG version]

(6) From the reverse side of the microphone board, remove

the screw

attaching the microphone board to the brack-

et(H.phone) on the phone jack board. (See Fig.15.) [US/
UW/UG version]

3.1.11 Removing the operation board

(See Fig.16)

• Prior to performing the following procedures, remove the metal

cover and front panel assembly.

(1) Remove the two screws

attaching the operation board.

(2) Take out the operation board together the button(top).

Reference:

Remove the button(top) from the front board as required.

3.1.12 Removing the front board

(See Figs.16 and 17)

• Prior to performing the following procedures, remove the metal

cover, front panel assembly and connect board and operation
board.

(1) From the front side of the front panel assembly, pull out the

volume knob. (See Fig.17.)

(2) From the inside of the front panel assembly, remove the

eight screws

attaching the front board. (See Fig.16.)

(3) Take out the front board while releasing the claws

in the

direction of the arrow. (See Fig.16.)

Fig.15

Fig.16

Fig.17

CN561

Connect board

Card wire

Support board

Phone jack board

Microphone volume board

Wire

Microphone volume board

Phone jack board

Bracket (H.phone)

CN702

Operation board

Button(top)

Claws

Front board

Front panel assembly

Volme knob

Microphone volume knob

Содержание TH-M65











































Результаты поиска

Содержание TH-M65

Отзывы:

Похожие инструкции для TH-M65

Бренды по названию

Популярные бренды

JVC TH-M65, Руководство по обслуживанию

Результаты поиска

Содержание TH-M65

Отзывы:

Похожие инструкции для TH-M65

Бренды по названию

Популярные бренды