53
AV COMPU LINK Remote Control System
The AV COMPU LINK remote control system allows you to operate JVC video components (TV, VCR, and DVD player)
through the receiver.
This receiver is equipped with the AV COMPU LINK-III, which added a function to operate JVC video components through the video
components terminals. To use this remote control system, you need to connect the video components you want to operate, following the
diagrams below and the procedure on the next page.
• Refer also to the manuals supplied with your video components.
Notes:
• When connecting the receiver and a TV with the AV COMPU LINK EX terminal by using a component video cable, you cannot use Automatic
Selection of TV’s Input Mode (see page 54).
• When connecting the VCR 1 or DVD player only to this receiver, connect it directly to the receiver using cables with the monaural mini-plugs.
CONNECTIONS 2: Video Cable Connection
This receiver is equipped with three types of the video terminals — S-video, composite video, or component video, and the signals coming
into this receiver through one type of video terminals can output only through the terminal of the same type. So you need to connect the
VCR and/or DVD player to the TV using one of the following three ways:
• When using the AV COMPULINK remote control system, set the component video input correctly (see “Preparing for the
Component Video Input—COMPONENT IN” on page 32); otherwise, the correct input for this receiver will not be selected on the TV.
CONNECTIONS 1: AV COMPU LINK Connection
AV
COMPU LINK
VHS
AV
COMPU LINK
AV
COMPU LINK EX
DVD
AV
COMPU LINK III
RX-DP9VBK
IMPORTANT:
The AV COMPU LINK remote control system cannot control the DBS tuner connected to the TV
SOUND/DBS and DBS component video terminals, and video components connected to the VIDEO
and VCR 2 terminals on the receiver.
CAUTION:
When connecting the TV with the
AV COMPU LINK remote control
system, connect the receive to the
AV COMPU LINK EX or AV
COMPU LINK III terminal.
DO NOT connect the receiver to
the AV COMPU LINK RECEIVER/
AMP terminal.
TV
VCR 1
DVD player
To Video Input 2
Component
video cable
Component
video cable
TV
RX-DP9VBK
Source
Equipment
CASE 1
When connecting the source equipment to the receiver through the S-video terminals, connect this
receiver to the TV’s Video Input 1 terminal using S-video cables.
CASE 2
When connecting the source equipment to the receiver through the composite video terminals, connect
this receiver to the TV's Video Input 2 terminal (composite video input) using composite video cables.
CASE 3
When connecting the source equipment to the receiver through the component video terminals, connect
this receiver to the TV's Video Input 2 terminals (component video input) using component video cables.
To Video Input 1
TV
RX-DP9VBK
S-video cable
S-video cable
Source
Equipment
To Video Input 2
Composite
video cable
Composite
video cable
TV
RX-DP9VBK
Source
Equipment
EN53-64_RX-DP9VBK[J]_f
01.6.14, 10:07 AM
53