34
Sound Adjustments
When performing the sound adjustments, it is recommended to use the remote control so that you can show the
on-screen display menu on the TV.
•
When using the buttons on the unit, you can perform the same settings referring to the indications shown on the
main unit’s display. (The following on-screen display menus cannot be shown if you use the buttons on the unit.)
Note:
When performing sound adjustments viewing the indications on the
main unit’s display, the indications shown are slightly different from
what is shown on the on-screen display.
This is because of the limited number of characters shown on the
main unit’s display.
Ex. • “FRONT L LEVEL” is shown as “FRONT L LVL” on the main
unit’s display.
• “CENTER LEVEL” is shown as “CENTER LVL” on the main unit’s
display.
NOTICE—
• If Line Direct is in use (see page 21), you cannot make any
sound adjustments using the Adjustment Menu.
• Items on the menus shown above are all set to the initial
values when shipped from the factory.
• Some of the menus or some items on the menu cannot be
shown or cannot be adjusted. (For details, see the respective
explanation in this section.)
PARAMETRIC EQ
FRONT
CENTER
SURROUND
SURROUND BACK
:ENTER
:BACK
:ENTER
:EXIT
ADJUST MENU
LEVEL
PARAMETRIC EQ
DSP PARAMETER
CENTER CHANNEL
ADJUST MENU
1
LEVEL
(See page 37.)
3
DSP PARAMETER
(See page 38.)
PEQ FRONT (See page 38.)
PEQ CENTER (See page 38.)
PEQ SURROUND (See page 38.)
PEQ SURR(ound) BACK (See page 38.)
2
PARAMETRIC EQ
(See page 37.)
4
CENTER CHANNEL
(See page 38.)
:OPERATE :BACK
LEVEL
TEST TONE :OFF
FRONT L LEVEL: 0dB
CENTER LEVEL : 0dB
FRONT R LEVEL: 0dB
SURR R LEVEL : 0dB
SBACK R LEVEL: 0dB
SBACK L LEVEL: 0dB
SURR L LEVEL : 0dB
SUBWOOFER : 0dB
:OPERATE
:BACK
DSP PARAMETER
EFFECT LEVEL :3
ROOM SIZE :3
LIVENESS :3
WALL TYPE :3
SEAT POSITION:1
CENTER CHANNEL
CENTER EQ : OFF
CENTER ALINMENT: OFF
:OPERATE
:BACK
:OPERATE
:BACK
PEQ SURR BACK
BASS FREQ : 100Hz
BASS LEVEL : 0dB
MID FREQ : 1.0kHz
MID LEVEL : 0dB
TREBLE FREQ :10.0kHz
TREBLE LEVEL: 0dB
:OPERATE
:BACK
PEQ FRONT
BASS FREQ : 100Hz
BASS LEVEL : 0dB
MID FREQ : 1.0kHz
MID LEVEL : 0dB
TREBLE FREQ :10.0kHz
TREBLE LEVEL: 0dB
:OPERATE
:BACK
PEQ CENTER
BASS FREQ : 100Hz
BASS LEVEL : 0dB
MID FREQ : 1.0kHz
MID LEVEL : 0dB
TREBLE FREQ :10.0kHz
TREBLE LEVEL: 0dB
:OPERATE
:BACK
PEQ SURROUND
BASS FREQ : 100Hz
BASS LEVEL : 0dB
MID FREQ : 1.0kHz
MID LEVEL : 0dB
TREBLE FREQ :10.0kHz
TREBLE LEVEL: 0dB
Adjustment Menu Configuration
EN34-38_RX-DP9VBK[J]_f
01.6.14, 9:54 AM
34