JVC RX-8010RBK Скачать руководство пользователя страница 114

Страница: 114 / 141

TEST

TEST TONE L

(Left front speaker)

TEST TONE LS

(Left rear speaker)

TEST TONE RS

(Right rear speaker)

TEST TONE C

(Center speaker)

TEST TONE R

(Right front speaker)

9. Press LIVENESS to adjust the liveness.

• Each time you press the button, the

liveness changes as follows:

As the number increases, the attenuation level of reflections
over time decreases so that acoustics change from “Dead” to
“Live.” (Normally set it to “LIVENESS 3.”)

Adjusting the Surround Modes with the
DAP Modes

Before you start, remember...
• Make sure that you have set the speaker information correctly

(see page 17).

• There is a time limit in doing the following steps. If the setting is

canceled before you finish, start from step 4 again.

• You cannot adjust the rear speaker output levels when you have set

“REAR SPK” to “NONE.” See page 17.

• You cannot adjust the center speaker output level and center tone

when you have set “CTR SPK” to “NONE.” See page 17.

• To adjust the front speaker output balance and subwoofer output

level, see pages 16 and 17.

From the remote control:

1. Select and play a sound source.

• To enjoy Dolby Pro Logic, play back a software encoded with

Dolby Surround and labeled with

DOLBY SURROUND

mark.

• To enjoy Dolby Digital, play back a software encoded with

Dolby Digital and labeled with

D I G I T A L

mark.

• To enjoy DTS Digital Surround, play back a software encoded

with DTS Digital Surround and labeled with

mark.

2. Press SURROUND ON/OFF to

activate an appropriate Surround
mode — PRO LOGIC, DOLBY
DIGITAL or DTS SURROUND.

The SURROUND ON/OFF lamp on the front panel button lights
up.
• Each time you press the button, the Surround mode turns on

and off alternately.

• When “PRO LOGIC” is selected, the PRO LOGIC indicator

lights up on the display.

3. Press DSP MODE repeatedly until

the DAP mode you want to adjust
— THEATER 1, THEATER 2,
HALL 1, HALL 2, LIVE CLUB,
DANCE CLUB, or PAVILION —
appears on the display.

The DSP MODE lamp on the front panel button lights up, and
the DSP indicator also lights up on the display.

4. Press SOUND.

The 10 keys are activated for sound adjustments.

LIVENESS 1

LIVENESS 5

LIVENESS 4

LIVENESS 2

LIVENESS 3

LIVENESS

5. Press TEST to check the speaker

output balance.

“TEST TONE L” starts flashing on the
display, and a test tone comes out of the
speakers in the following order:

Notes:

• You can adjust the speaker output levels without outputting the

test tone.

• No test tone comes out of the center speaker when “CTR SPK”

is set to “NONE” (see page 17).

• No test tone comes out of the rear speakers when “REAR SPK”

is set to “NONE” (see page 17).

• If the TV is turned on and the proper video input is selected on

the TV, the test tone screen will appear on the TV.

6. Select the speaker you want to adjust.

• To select the center speaker level, press CENTER.

“CTR” appears on the remote control display window.

• To select the left rear speaker level, press REAR L.

“REARL” appears on the remote control display window.

• To select the right rear speaker level, press REAR R.

“REARR” appears on the remote control display window.

7. Press LEVEL +/– to adjust the

speaker output levels (–10 dB to
+10 dB).

8. Press SOUND.

• To adjust other speaker output levels repeat steps

6 and 7.

9. Press TEST again to stop the test

tone.

10.Press CTR TONE to select the

center tone level you want.

The center tone adjustment affects the mid-
frequency range, which the human voice is
mostly made up of.
• Each time you press the button, the display changes to show

the following:

To make the dialogue softer, select “CTR TONE 1” or “CTR
TONE 2.”
To make the dialogue clearer, select “CTR TONE 4” or “CTR
TONE 5.”
When “CTR TONE 3” is selected, no adjustment is applied.

∗

CENTER

∗

REAR L

FM MODE

+10

∗

REAR R

100+

+
−

CH/

∗