JVC RX-7000RBK Скачать руководство пользователя страница 98

Страница: 98 / 126

English

Adjusting the Surround Modes

Once you have adjusted the Surround modes, the adjustment is
memorized for each Surround mode.

Dolby/DTS/MPEG Surround adjustments

Before you start, remember...
• Make sure that you have set the speaker information correctly

(see page 14).

• There is a time limit in doing the following steps. If the setting is

canceled before you finish, start from step 1 again.

• You cannot adjust the rear speaker output levels when you have set

“REAR SPK” to “NONE.” See page 14.

• You cannot adjust the center speaker output level when you have

set “CENTER SPK” to “NONE.” See page 14.

From the remote control:

1. Press SURROUND ON/OFF to

activate an appropriate surround
mode — PRO LOGIC, DOLBY
DIGITAL, DTS SURROUND, or
MPEG SURROUND.

• Each time you press the button, the Surround mode turns on

and off alternately

• When “PRO LOGIC” is selected, the

PRO LOGIC

indicator lights up on the display.

Note:

You can also press SURROUND MODE to activate an appropriate
Surround mode.

2. Press SOUND.

The 10 keys are activated for sound adjustments.

3. Press TEST to check the speaker

output balance.

“TEST TONE L” starts flashing on the
display, and a test tone comes out of the
speakers in the following order:

3. Adjust the effect level.

1) Press (BALANCE/) SURROUND

ADJUST repeatedly until “DSP
EFFECT” appears on the display.
The display changes to show the current
setting.

2) Turn MULTI JOG to select the effect

level.
• As you turn it, the effect level changes

as follows:

As the number increases, the selected DAP mode becomes
stronger.

From the remote control:

1. Press SURROUND MODE

repeatedly until the DAP mode —
LIVE CLUB, DANCE CLUB,
HALL, or PAVILION — appears
on the display.

The DSP indicator also lights up on the display.
• When you have set “REAR SPK” to “NONE,” the 3D-

PHONIC indicator also lights up.

2. Press SOUND.

The 10 keys are activated for sound adjustments.

3. Adjust the speaker output levels.

• To adjust the left rear speaker level, press

REAR•L –/+ (from –10 dB to +10 dB).

• To adjust the right rear speaker level, press

REAR•R –/+ (from –10 dB to +10 dB).

4. Press EFFECT to select an effect

level you want.

• Each time you press the button, the effect

level changes as follows:

As the number increases, the selected DAP mode becomes
stronger.

SURROUND

MODE

SOUND

EFFECT

DSP EFFECT 1

DSP EFFECT 2

DSP EFFECT 3

DSP EFFECT 4

DSP EFFECT 5

REAR•L

ENTER

SURROUND

ON/OFF

TEST

SOUND

TEST TONE L

(Left front speaker)

TEST TONE LS

(Left rear speaker)

TEST TONE RS

(Right rear speaker)

TEST TONE C

(Center speaker)

TEST TONE R

(Right front speaker)

Notes:

• You can adjust the speaker output levels without outputting the

test tone.

• No test tone comes out of the center speaker when “CENTER

SPK” is set to “NONE” (see page 14).

• No test tone comes out of the rear speakers when “REAR SPK”

is set to “NONE” (see page 14).

• If the TV is turned on and the proper video input is selected on

the TV, the test tone screen will appear on the TV.

REAR•R

BALANCE/

SURROUND

ADJUST

MULTI JOG

DSP EFFECT 1

DSP EFFECT 2

DSP EFFECT 3

DSP EFFECT 4

DSP EFFECT 5

EN24_33.RX-7000R[E]/f

00.4.24, 3:02 PM

Содержание RX-7000RBK































































































































Результаты поиска

Содержание RX-7000RBK

Отзывы:

Похожие инструкции для RX-7000RBK

Бренды по названию

Популярные бренды

JVC RX-7000RBK, Руководство по обслуживанию

Результаты поиска

Содержание RX-7000RBK

Отзывы:

Похожие инструкции для RX-7000RBK

Бренды по названию

Популярные бренды