19
English
RECORDING
RANDOM
MUTING
EQ
1
2
3
4
5
6
7
8
9
0
VOL
REMOTE CONTROL UNIT
RM-SRCEZ38 A
TAPE
TUNER/
BAND
CD
USB
REPEAT
SLEEP
MENU/
FM MODE
STOP/
ENTER
PROGRAM/
PRESET
STANDBY
/
ON
/
2
3
1
1
1
Standard recording
1
Prepare the recording source.
• When recording from the radio:
Set to the tuner mode and tune in a desired station.
• When recording from a CD:
Set to the CD mode and load a CD.
2
Load a blank or erasable cassette.
Use only a type-I normal tape.
3
Press
¶
REC.
3
PLAY is also depressed, and recording starts.
To stop recording
Press
§
STOP/EJECT.
The tape also stops when it reaches the end.
Notes:
•
It should be noted that it may be unlawful to re-
record pre-recorded tapes, records, or discs without
the consent of the owner of copyright in the sound
or video recording, broadcast or cable program and
in any literary, dramatic, musical, or artistic work
embodied therein.
• The recording level is automatically set correctly, so it
is not affected by VOLUME. Thus, during recording
you can adjust the sound you are actually listening to
without affecting the recording level.
• If a recording you made has excessive noise or static,
the unit may have been too close to a TV which was on
during the recording. Either turn off the TV or increase
the distance between the TV and the unit.
Using the beat-cut function
When recording an AM broadcast, beats may occur.
If this happens while recording an AM broadcast, adjust
the BEAT CUT switch on the rear to select the beat-cut
setting, “CUT-1” or “CUT-2.”
BEAT
CUT
2
1
Synchronized recording with the CD or USB
player
• In this unit, the CD or USB player starts playback when
deck enters the recording mode.
1
Set the STANDBY/ON
button to ON.
2
Load a cassette.
3
Load a disc.
4
Set to CD or USB.
5
Press the
¶
REC button and
3
PLAY buttons,
synchronized recording will start.
• When the tape reaches the end first, the CD or USB
player pauses automatically; when the CD or USB
player stops first, the tape continues running. In this
case, press the
§
STOP/EJECT button to stop
the tape.
8
PAUSE button
First of all, press the
8
PAUSE button. Then, press the
¶
REC and
3
PLAY buttons, thus entering the record-pause
(standby) mode. After that re-press the PAUSE button at
the exact moment you want to start recording. This releases
the tape to begin recording at a precise moment.
• Do not leave the unit in pause mode for more than a
few minutes. Instead, push the
§
STOP/EJECT
button and turn the power off.
Erasing
When recording on a pre-recorded tape, the previous
recording is automatically erased and only the new
material can be heard when the tape is played.
To erase a tape without making a new
recording ...
1
Press TAPE to enter the tape mode.
2
Press
¶
REC to start recording.
Caution:
If a recording you make has excessive noise or static, the
unit may have been too close to a TV which was on
during the recording. Either turn off the TV or increase
the distance between the TV and the unit.
02_01-22_RC-EZ38S.p65
05.11.29, 7:00 PM
19
