2. Panel Instruction
DT-X71FI
Front view
⑴
PHONE:
Earphone jack
⑵
POWER:
Power on/off
Connect with power cable or mount battery, press the “
POWER
” and the power indicator is turned on
and after 10 seconds, the monitor will be switched on and get into normal working status. Press the
“
POWER
” again, the indicator is turned off and monitor is switched off.
Disconnect with power cable or take off the battery if the monitor will not be used for a period of time.
⑶
SOURCE:
Input signal selection
Press “SOURCE” and revolve the “OK” to select the input video signal.
⑷
F1:
User definable function key 1
⑸
FOCUS:
Peaking Focus Assist
Press “FOCUS” once, it will display the current peaking on/off status. Press “FOCUS” again to switch
on RED line focus assist, switch on BLUE line focus assist, and switch off in turn.
⑹
F.COLOR:
False color
Press “F.COLOR” once, it will display the current false color on/off status. Press “F.COLOR” again to
switch on/off the false color mode.
⑺
DISPLAY:
Display current settings
Press “Display” to display safety mark, title and the current input signal information
⑻
F2:
User definable function key 2
⑼
F3:
User definable function key 3
⑽
WAVEFORM:
Display waveform
Press “WAVEFORM” once, it will display the waveform menu as:
Revolve “OK” to select a waveform display mode and turn it on.
The selected waveform will display on the screen.
⑾
VECTOR:
Display vector scope
Press “VECTOR” to switched on/off the Vector scope
⑿
MENU:
Press to enter Menu
⒀
OK:
Select and Apply
Under menu system, revolve “OK” to adjust settings and press to apply; and out of menu system,
directly revolve “OK” to adjust volume.
⒁
TALLY Light:
Red, Green and Yellow 3-color TALLY indicator
All manuals and user guides at all-guides.com
all-guides.com
