– 35 –
Ex. CD is selected as the source
6
Rotate the left jog dial to select the recordable MD.
7
Press SET.
Playback of the source disc starts.
• When the source is CD, playback starts from CD 1 to
CD 3 if two or three CDs are loaded.
8
Decide if you want to include the current track in
the program or skip it.
• To include the current playing track in the
program, press SET.
The current track is programed (“MEMORY”
appears for a while) and the next track starts playing.
(After the last track of a CD is programed, the first
track of the next CD starts playing.)
• To skip the current track, press CANCEL or rotate
the right jog dial clockwise.
The current playing track is not programed and the
next track starts playing.
If you do not either press the button or rotate the right
jog dial, the unit will play the same track repeatedly.
9
Repeat step 8 to program other tracks.
When you finish checking all tracks or if there is no more
remaining time for recording on the MD, Listening Edit
Recording starts automatically.
• If the remaining time of the MD becomes short, MD
deck B will search for a track fitting into the remaining
time. To include the track found in the program, press
SET. To find another, press CANCEL.
To stop any time during editing process and start
recording, press START (ENTER).
Ex. MD 3 is selected as the recordable MD
Playing time of the
source track
Remaining time
on the MD
Listening Edit Recording
Listening Edit Recording allows you to make a program
while listening and checking each track of the loaded CDs
(up to 3 CD) or an MD in MD deck A, then to start
recording the program.
• You can program up to 32 tracks.
• Before you start recording in the following steps, you
can —
– cancel the setting, press REC MODE.
– go back to the previous steps, press CANCEL.
On the unit ONLY:
1
Prepare a CD or an MD as the source sound.
• To use a CD as the source:
Always place a CD on the CD 1 tray. If not, this
function does not work.
• To use an MD as the source:
Insert a source MD in the loading slot of MD deck A.
2
Insert a blank or recordable MD into the MD B
loading slots.
3
Press REC MODE.
“MD
3
MD REC?” appears in the main display.
The MD
3
MD lamp also lights.
4
Rotate the left jog dial until “LISTENING?”
appears in the main display, and the correct
recording mode lamp (CD
3
MD or MD
3
MD)
lights on the unit.
• To use a CD as the source:
Light the LISTENING EDIT and CD
3
MD lamps.
• To use an MD as the source:
Light the LISTENING EDIT and MD
3
MD lamps.
5
Press SET.
EN23-37.CA-WMD90R[B]/f
99.3.4, 8:25 PM
35
