– 21 –
To locate a particular point in a track during play
On the unit:
Rotate the left jog dial.
• Counterclockwise (
1
): Fast reverses the tacks.
• Clockwise (
¡
) :
Fast forwards the tracks.
On the remote control:
Press and hold
4
1
or
¢
¡
.
•
1
: Fast reverses the tracks.
•
¡
: Fast forwards the tracks.
To go to another track
On the unit:
Rotate the right jog dial.
• Counterclockwise (
4
): Goes back to the beginning of
the current or previous tracks.
• Clockwise (
¢
) : Skips to the beginning of the next or
succeeding tracks.
On the remote control:
Press
4
1
or
¢
¡
repeatedly.
•
4
: Goes back to the beginning of the current or
previous tracks.
•
¢
: Skips to the beginning of the next or succeeding
tracks.
To go to another track directly using the number
buttons
Pressing the number button(s) allows you to start playing
the track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 32, press +10, +10, +10, then 2.
Programming the Playing Order of the
Tracks — Program Play
You can arrange the order in which the tracks play before
you start playing. You can program up to 32 tracks.
1
Load CDs.
• If the current playing source is not the CD player,
press
#
/
8
on the CD player (or CD
6
on the
remote control), then
7
on the CD player (or
7
on
the remote control) before going to the next step.
2
Press PLAY MODE so that “ CD PROGRAM”
appears in the main display.
• Each time you press the button, play mode changes
as follows:
Step No.
3
Press one of the CD number buttons (CD 1, CD 2,
and CD 3) to select the CD number you want to
play.
4
Select the track from the CD selected in the above
step.
On the unit:
Rotate the right jog dial to select the track number,
then press SET.
On the remote control:
Press the number buttons.
• For how to use the number buttons, see “To go to
another track directly using the number buttons” to
the left.
5
Program other tracks you want.
• To program tracks from the same disc, repeat step 4.
• To program tracks from a different disc, repeat steps
3 and 4.
6
Press
#
/
8
on the CD player (or CD
6
on the
remote control).
The tracks are played in the order you have programed.
To stop during play, press
7
on the CD player.
To exit from program play mode, press PLAY MODE
once or twice, before or after play, so that the unit enters
another playback mode (Random play or Continuous play
mode).
To check the program contents
Before playing, you can check the program contents by
pressing
4
1
or
¢
¡
on the remote control.
•
¢
¡
: Shows the programed tracks in the programed
order.
•
4
1
: Shows them in the reverse order.
To modify the program
Before playing, you can erase the last programed track by
pressing CANCEL. Each time you press the button, the last
programed track is erased from the program.
• When you eject a disc, the tracks selected from that
ejected disc are erased from the program.
To add tracks in the program before you start play,
simply select track numbers you want to add.
CD PROGRAM
Canceled
(Continuous play)
CD RANDOM
Ex. Disc No. 2 is selected
Ex. Track No. 8 is selected
Disc No. and Track No.
EN10-22.CA-WMD90R[B]/f
99.3.4, 8:24 PM
21
