JVC MX-GA8, Руководство по обслуживанию

Страница: 13 / 59

(No.MB080)1-13
3.3.3 Removing the sensor board
(See Fig. 5)
• Prior to performing the following procedure, remove the CD
tray.
(1) Remove the screw A attaching the sensor board on the CD
tray.
(2) Remove the sensor board releasing the two tabs a .
(3) Disconnect the harness from the connector CW1 on the
sensor board.
Fig.5
3.3.4 Removing the turn tray motor
(See Fig. 6 and 7)
• Prior to performing the following procedure, remove the CD
tray and sensor board.
(1) Remove the screw B attaching the turn tray. Detach the
turn tray from the base tray.
(2) Pull outward the tab b attaching the turn tray motor on the
base tray and detach the turn tray motor.
Fig.6
Fig.7
Tab a
Sensor board
CW1
A
Turn tray
Base tray
B
Tab b
Turn tray motor