manualshive.com logo in svg

JVC MP-XV841, Инструкция по эксплуатации, Страница: 99 / 232

Поделиться
Скачать
JVC MP-XV841 Скачать руководство пользователя страница 99

EN 

99

Wireless LAN

Q.

I can’t communicate.

A.

Check the following.

 •

Is the wireless switch in ON position? See page 13 for details.

 •

Is the device serving as the other end of the communication the kind of device which can
communicate with the PC?

A number of communication systems can be used with the wireless LAN, but unless the
same system is used at both ends, communication will not be possible.

 •

Has the security been set correctly?

Select the same setting for the network key (WEP, WPA encryption, etc.) of this PC’s wireless
LAN as the one used by the access point.

 •

Has the IP address been set correctly?

Check whether the IP address been set correctly by taking step 3 (Set the IP address to be
used by the wireless LAN) on page 72 in the section entitled “Setup Procedure for the
wireless LAN.”

 •

If the wireless LAN cannot be set to ON or OFF

First select [My Network Places] 

¥

 [Display Network Connections], and then check whether

“Wireless Network Connection” has been disabled.
If it is disabled, double-click to enable it on the “Connection Status” screen.

Q.

The communication speed is slow.

A.

•

Check the distance between the PC and the other end of the communication.  In some
cases, the communication speed varies depending on the distance involved.

•

Depending on obstacles between PC and access point this could be normal. Try changing
locations.

Q.

I can’t share with other computers on the network.

A.

If no other computers appear on “Local Network” selected from “My Network Places,”
establish the same “Workgroup” or “Domain” setting.

Q.

When using this PC’s wireless LAN, the chat function (audio, video) in Windows
Messenger does not work.

A.

Remove the check mark from the “QoS Packet Scheduler” option. The procedure is shown below.
1. Click the [start] button in Windows, and then click [Control Panel].
2. Click [Network and Internet Connections], and then click [Network Connections].
3. Right-click the [Wireless Network Connection] that is currently enabled, and then click [Properties].
4. Remove the check mark from “QoS Packet Scheduler”.
5. Click [OK].
6. Restart the computer.

Continue to next page

XP841US̲088̲115.p7.0J

04.5.21, 6:32 PM

99

Содержание MP-XV841









































































































































































































































Отзывы:

Нет отзывов