background image

92

 EN

Q&A

There are several troubleshooting keys.  If you are not sure how to operate your PC, your PC does
not work well, or you suspect that your PC has been damaged, follow the relevant troubleshooting
steps in the Q&A section.

If the Q&A does not help you

Contact us.

Refer to page 82 for JVC Support.

Power

Q.

The power does not turn on.

A.

  

Check the following.

 •

Check that the Power key is pressed.

Press the 

 (On/Off) key to turn on your PC.  See “Turning 

(On/Off) key On” on page

19.

When you are using your PC on AC power

 •

Check that the AC adapter is connected.

For connection, see “3. Recharge the battery pack by plugging the AC cord into DC Input
connector” on page 17.

When you are using your PC on the battery

 •

Check that the battery is fully charged.

For how to charge the battery, see “4. Make sure that the battery pack is fully recharged” on
page 18.

TROUBLESHOOTING

XP831GB̲088̲115.p7.0J

04.5.6, 5:04 PM

92

Содержание MP-XV841









































































































































































































































Отзывы: