manualshive.com logo in svg

JVC MP-XV841, Инструкция по эксплуатации

Инструкция JVC MP-XV841 доступна для загрузки бесплатно на нашем сайте. Этот руководящий документ содержит полезную информацию о продукте, которая поможет вам правильно использовать его возможности. Скачайте мануал сейчас на manualshive.com и наслаждайтесь вашим устройством!

Поделиться
Скачать
background image

10

 EN

END-USER LICENCE AGREEMENT

Important:

Please carefully read this End-User Licence Agreement (“Agreement”) before installing or using
the G.726 Decoder (“Software”) on your PC.  The right to use the Software is granted by Victor
Company of Japan, Limited (“JVC”) to You only on the condition that You agree to the following
Agreement.  If You do not agree to the terms of the Agreement, you may not install the Software
any more.  HOWEVER, INSTALLING OR USING THE SOFTWARE INDICATES YOUR
ACCEPTANCE OF THESE TERMS AND CONDITIONS.  The Software also includes the associated
materials, and any modification, upgrade and update of the Software granted to You by JVC.

1. Copyright; Ownership

You acknowledge that all copyrights and other intellectual property rights in the Software is
owned by, and remain vested in Sharp Corporation, a Japanese corporation, and JVC is the
authorized licensee of Sharp Corporation to duplicate, use and distribute the Software.  The
Software is protected under the copyright law of Japan and other countries, and related
Conventions.  You must use the Software in the same manner as You use any other copyrighted
work in compliance with these laws and conventions and other regulations.

2. Grant of Licence

(1) Subject to the conditions of the Agreement, JVC grants to You a non-exclusive right to use

the Software.

(2) You may install and use the Software in Your PC.
(3) You may make a copy of the Software in whole or in part for the back-up and storage

purposes.

3. Restriction

(1) You may not modify, reverse engineer, decompile or disassemble (except to the extent as

permitted by the applicable laws) the Software in any manner.

(2) You may not copy or use the Software, in whole or in part, other than as expressly specified

in this Agreement.

(3) You may not remove the copyright and/or other proprietary rights notice from the Software.

You may make copies of the Software hereunder, provided that each such copy contains
copyright and/or other proprietary rights notice in the same manner as appeared originally
on this Agreement and the Software.

(4) You have no right to grant a licence to use the Software, and may not sell, lease or rent the

Software to any other person for any purpose.

4. Transfer of the Software

You may not transfer or assign the Software (either stored in the recording media or not) to any
other person, unless such other person as the transferee or assignee agrees to this Agreement.
Such assignee or transferee will be bound by the same conditions as provided for in this
Agreement, and the licence originally granted to You hereunder will then be null and void.

5.  Limited Warranty

THE SOFTWARE IS PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND.  JVC DOES
NOT MAKE ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE.  SHOULD THERE BE ANY PROBLEM ARISING FROM OR CAUSED BY THE
SOFTWARE, YOU SHOULD SETTLE ALL SUCH PROBLEMS AT YOUR OWN COST AND
RESPONSIBILITY.

XP831GB̲002̲022.p7.0J

04.5.6, 4:48 PM

10

Содержание MP-XV841









































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для MP-XV841

IBM ThinkPad 560Z Quick Reference Manual preview
ThinkPad 560Z
Бренд: IBM Страницы: 2
Psion Teklogix Netbook Pro none Quick Start Manual preview
Netbook Pro none
Бренд: Psion Teklogix Страницы: 92
Aspire TravelMate 2420 Series Service Manual preview
TravelMate 2420 Series
Бренд: Aspire Страницы: 108
BenQ Joybook R41 series User Manual preview
Joybook R41 series
Бренд: BenQ Страницы: 42
Packard Bell EasyNote TE69KB User Manual preview
EasyNote TE69KB
Бренд: Packard Bell Страницы: 120
Acer Packard Bell 314 User Manual preview
Packard Bell 314
Бренд: Acer Страницы: 33
Acer Predator 17 X GX-792 User Manual preview
Predator 17 X GX-792
Бренд: Acer Страницы: 94
Acer Predator Triton 500 SE User Manual preview
Predator Triton 500 SE
Бренд: Acer Страницы: 105
Acer Predator Helios 700 User Manual preview
Predator Helios 700
Бренд: Acer Страницы: 98
Acer Predator Helios 500 User Manual preview
Predator Helios 500
Бренд: Acer Страницы: 90
Acer PREDATOR 15 G9-591 User Manual preview
PREDATOR 15 G9-591
Бренд: Acer Страницы: 90
Acer R756T User Manual preview
R756T
Бренд: Acer Страницы: 16
Dell Latitude 13 Education Series Technical Manualbook preview
Latitude 13 Education Series
Бренд: Dell Страницы: 42
Dell Inspiron P10F002 Quick Start Manual preview
Inspiron P10F002
Бренд: Dell Страницы: 18
Fujitsu ESPRIMO Mobile U9210 Datasheet preview
ESPRIMO Mobile U9210
Бренд: Fujitsu Страницы: 6
Fujitsu ESPRIMO Mobile V5505 Easy Manual preview
ESPRIMO Mobile V5505
Бренд: Fujitsu Страницы: 27
Fujitsu CELSIUS H730 Operating Manual preview
CELSIUS H730
Бренд: Fujitsu Страницы: 92
Fujitsu E5511 Quick Start Manual preview
E5511
Бренд: Fujitsu Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды