JVC MP-XV841 Скачать руководство пользователя страница 205

Страница: 205 / 232

System Recovery Procedure

1. Hold down the F10 key and press the Power button to start up your PC.

When message “Do you wish to continue? (Y/N)” appears, respond with Y.

Tips

• If you respond with N, the recovery is cancelled. The PC will restart and the Windows OS

will start up.

• If too much time is taken to press the key or a continuous beep is heard for other reasons,

turn off the power, and repeat the process.

• If Windows starts up after a delay, exit Windows, turn off the power, and repeat the process.

2. Read the Licence Agreement when displayed.

If you accept the Agreement, type Y.

Tips

If you respond with N, the recovery is cancelled. The PC will restart and the Windows OS
will start up.

3. Select the recovery method (disk partitioning).

When message “Select the recovery method (A (Recommended)/C)” appears, respond with
the

key as follows.

If you respond with A:

All disk partitions and files of the hard disk are recovered, and the entire PC system is
initialized to its original state.

If you respond with C:

The files of drive C are recovered and initialized.
(Usually, all data of drive D remains unaltered, as they are, and only the data of drive C is
initialized. If drive D has already been removed, the PC only has drive C.)

4. The system recovery starts, and its progress is shown on the screen.

Continue to next page

XP831GB̲088̲115.p7.0J

04.5.6, 5:04 PM

Содержание MP-XV841









































































































































































































































Результаты поиска

Содержание MP-XV841

Отзывы:

Похожие инструкции для MP-XV841

Бренды по названию

Популярные бренды

JVC MP-XV841, Инструкция по эксплуатации

Результаты поиска

Содержание MP-XV841

Отзывы:

Похожие инструкции для MP-XV841

Бренды по названию

Популярные бренды