JVC LT-42C550, Инструкция по эксплуатации

Страница: 24 / 64

24
4. Channel tuning will commence. This operation may take up to 6 minutes.
The display will show the progress of the tuning and the number of
channels found.
5. If you want to skip the DTV tuning, press the MENU button to interrupt
the tuning half way. A pop-up screen will be displayed, press the
button to select YES to confirm. You will then go straight to ATV tuning.
You may repeat the above step if you also want to skip the ATV tuning.
6. During DTV tuning, your TV may have received signals from more than
one transmitter. If this has occurred, the Target Region Setting screen
will be displayed. Please refer to the section "Target Region Setting" on
page 22 for details.
7. After tuning is complete, the channels are arranged in a preset order. If
you wish to skip channels, modify the preset order or rename channels,
select Channel Edit under the channel menu (refer to page 26 for
details).
3. In the Tune Type menu, press the buttons to select DTV / ATV /
DTV+ATV. Press the button and then press the buttons to
select the country where you will operate the TV. Press the OK button to
confirm.
2. Press the
buttons to select Auto Tuning and then press the OK
button.
Channel Setting (TV, DTV or Radio Mode)
Auto Tuning
Use this to automatically find and store all available channels. This is normally recommended if some channels have been added
or removed by the broadcaster or if you have moved.
1. Press the MENU button and then press the buttons to select the
CHANNEL menu and then press the OK button.
Channel Tuning
DTV : 3 Channel(s)
Radio : 0 Channel(s)
Data
: 0 Channel(s)
36%... UHF CH 21 (DTV)
Press [MENU] to skip.
CHANNEL
PICTURE
SOUND
TIME
OPTION
LOCK
EXIT
EXIT
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Signal Information
CI Information
Software Update (OAD)
Software Update (USB)
Channel Edit
CHANNEL
UK
Ireland
Belgium
Bulgaria
Croatia Finland
Czech France
Denmark
Channel Tuning DTV
BACK MENU EXIT
5 Customising TV Settings
Chapter
5