64
4.
Enable Live TV Pause, as explained in the following topic.
Enabling Live TV Pause
You can start setting up Live TV Pause in any of the following ways:
•
Go to
Settings > TV inputs > Antenna TV > Live TV Pause
, and then select
Enable
.
•
After completing a channel scan, select
Set up Live TV Pause
from the
available options.
•
Press
Play/Pause
on the Roku remote while watching a digital Antenna TV
channel.
•
Highlight the Antenna TV tile on the Home screen, press
on the remote, and
then select
Enable Live TV Pause
.
After starting setup of Live TV Pause in any of these ways, the TV prompts you
through the steps needed to enable this feature. Setup takes only a few moments.
Note
:
Use of a USB hub is not supported.
Using Live TV Pause
If you have used the Roku remote to watch streaming channels, using Live TV Pause
should be very familiar to you.
•
While watching a digital Antenna TV channel, press
PLAY/PAUSE
to pause or
play the content. After the TV program has been paused for 90 minutes, the
TV resumes playing.
•
After watching a channel for a while, press
REWIND
to jump back up to the
point where you first started watching the channel, up to 90 minutes.
•
After pausing or rewinding, press
FAST FORWARD
to jump ahead up to the
point where you are once again watching the live TV program.
•
Press
FAST FORWARD
or
REWIND
repeatedly to cycle through 1x, 2x, and 3x
skip speeds. Press
INSTANT REPLAY
to play back the last several seconds of
the program.