EN
17
English
• Enter the
IP address
,
Subnet mask
,
Default
gateway
,
Primary DNS
and
Secondary DNS
values. Use the alphanumeric buttons to enter
numbers and the navigation buttons to move
from one entry field to another.
- Once
Auto
or
Manual IP setting
is completed,
press
MENU
to go back, press
▲/▼
to select
Connection test
, then press
OK/►
to check the
Internet connectivity
again.
5.
If you want to see the information on current
connection, such as
Interface
,
Address type
,
IP address
, etc., select
Network > Network
settings > Information
, then press
OK/►
.
Connecting to a wireless network
To establish a wireless connection between your
TV and your network, you need a wireless router or
modem and a Wireless LAN Adapter.
1.
Press
MENU
on the remote control and select
Network > Network settings > Internet
connection
. Press
◄/►
to select
On
.
2.
Press
▲/▼
to select
Interface
, then set
◄/►
to
Wireless
to select wireless-mode connection.
3.
Press
▲/▼
to select
Wireless setting
and press
OK/►
to enter.
4.
You can set up the wireless network connection in
3 ways: a) or b) or c).
-
a) Scan
• Press
▲/▼
to select
Scan
, then press
OK/►
.
The TV will search all access points within
range, access points found by the TV will be
displayed.
• Press
▲/▼
to select an available access point,
then press
OK/►
to connect the TV.
Notes:
-
If you select a protected access point, you will
have to enter the corresponding password.
Press
OK
on the remote control to display the
virtual keyboard to enable you to enter the
password.
-
This set is able to memorize the available
access point, which enables it to connect to
the network even if you switch on your TV
after power-off.
-
b) Manual
Press
▲/▼
to select
Manual
, then press
OK/►
,
you will be prompted to enter the correct SSID
of an available wireless router to set up the
connection.
-
c) Auto
If your AP (Access Point) supports WPS (Wi-
Fi Protected Setup), you can connect to the
network via PIN (Personal Identification Number)
or PBC (Push Button Configuration). WPS will
automatically configure the SSID and WPA key
in either mode.
Press
▲/▼
to select
Auto
, then press
OK/►
to
enter.
•
PIN:
Select
PIN
and press
OK/►
to enter.
Choose a random PIN code. Make sure
this code is installed on the AP. (For the
procedures, refer to your router manual.) Press
OK/►
again to set up the connection.
•
PBC:
If your router has a PBC push button,
select
PBC
, then press
OK/►
to enter. Press
the PBC push button on your router within
2 minutes after you press
OK/►
again. Your
TV will automatically acquire all the network
setting values it needs and connect to your
network.
5.
To check the Internet connectivity, follow the
instructions in steps 3 and 4 of the preceding
section
Connecting to a wired network
.
6.
To see the information on current connection,
follow the instructions in step 5 of the preceding
section
Connecting to a wired network
.
TV remote
This function allows you to turn a smart device into a
sophisticated remote control, providing more features
than your normal TV remote control. You can then
control your TV through your smart device.
1.
Select
Network > TV Remote
, then press
OK
to
enter the
TV Remote
menu. You will see details
for downloading the TV Remote application and
other related information.
The following instructions are based on the example
of a smartphone.
2.
Download and install into the smartphone. the
correct TV Remote application for the smartphone.
3.
Make sure the smartphone and the TV are in the
same home LAN (local area network) or network
segment.
4.
Run the TV Remote application on the
smartphone, it will search and communicate with
the TV automatically to enable the TV Remote
functionality.
5.
Once the TV and the smartphone are linked as
described in step 4, you will be able to enjoy the
extra features of the TV Remote function.
6.
To quit the TV Remote function, press
EXIT
on the
remote control.
DLNA (Share & See)
Note: This manual covers products with either
Share & See
or
DLNA
function.
Share &
See
is DLNA-compatible.
Connecting to your PC
Make sure to set up a wired or wireless connection
from your TV to a router first. Then connect your
PC to your router either through a network cable
Chapter 7
DLNA (Share & See)
Downloaded from www.vandenborre.be
