EN
8
Initial setup
Initial setup involves selecting all the settings required
to be able to search for and store all the analogue
and digital channels you can receive.
Make sure that the television is switched on and
follow all the steps in turn specified hereafter.
Note: If the channel search retrieved only the
analogue channels it could be caused by poor
broadcasting and therefore is not covered
by manufacturer warranty. Manufacturers
cannot be held responsible for lack of or poor
broadcasting in some areas.
The first time you switch the set on, the
Initial setup
wizard opens, which guides you through the initial
setup process.
Initial setup
Please select your language:
Language
English
Български
Hrvatska
Č
esky
Dansk
Select
Next
1.
Press
▲/▼
to select your language, then press
OK/►
to enter the next step.
2.
Press
▲/▼
to select your country, then press
OK/►
to enter the next step.
3.
Press
▲/▼
to select your location (
Home
or
Shop
), then press
OK/►
to enter the next step.
4.
Press
▲/▼
to select
Network connection
, then
press
OK/►
to enter the next step. (for more
information, see "Network connection" section
p.16)
Note: If you select
France
, you will have to enter the
Password setting
menu here in order to set
a password. Use the alphanumeric buttons to
enter a four-digit number for your password.
(Your password cannot be 0000) Re-enter the
same code to confirm the password. After that,
you will enter the next step automatically. (In
this step, you can only press
◄
to return to the
previous step.)
5.
Press
▲/▼
to select your tuner mode
Antenna
or
Cable
.
- a) If you have selected
Antenna
.
• Press
OK/►
to enter.
• Press
▲/▼
to select
Digital & Analogue
or
Digital
or
Analogue
, then press
OK/►
.
• Press
▲/▼
to select
Scan
, then press
OK/►
to start the automatic search for all DVB-T
digital and/or analogue channels.
Note: not all contries have
Favorite Network
Selection
function.
- b) If you have selected
Cable
.
• Press
OK/►
to enter.
• Press
▲/▼
to select
Digital & Analogue
or
Digital
or
Analogue
.
• If you select
Digital & Analogue
, press
OK/►
to enter. Then:
- Press
▲/▼
to select
Scan
, then press
OK/►
.
- Press
◄/►
to select the scan mode if
available (
Full
or
Advanced
).
- If you select
Full
, press
OK
to start the
automatic search for all DVB-C digital and/or
analogue channels.
- If you select
Advanced
, use the numeric
buttons to adjust the values for
frequency
,
symbol rate
,
network ID
, and use
◄/►
to
select the
modulation mode
; then press
OK
to start the search for all DVB-C digital and/or
analogue channels.
• If you select
Digital
, press
OK/►
to enter,
then follow all the same steps as for
Digital
& Analogue
above, to search for all DVB-C
digital channels.
• If you select
Analogue
, press
OK/►
to enter,
press
▲/▼
to select
Scan
, then press
OK/►
to
start the search for all analogue channels.
Note: To prevent the channel setup process from
being interrupted, wait for the message
indicating that the setup is complete.
6.
Before starting the scanning, you can also select
Skip scan
to skip the initial setup process. In this
case, to search and store your channels you may
do an automatic channel search by following the
instructions in the next section
Performing an
automatic channel search
.
7.
During the setup, you can follow the hints available
at the bottom of the screen to return to the
previous step by pressing ◄. You can also press
EXIT
to exit or interrupt the search halfway.
- At anytime during the initial setup process, you
can press ◄ to return to the previous step.
- Once the initial setup process is complete,
you can press
OK
to exit the initial setup. The
channels are arranged in a preset order. If you
wish to skip channels, modify the preset order
or rename channels,
select Setup > Organiser
and press
OK
/► to enter.
Performing an automatic channel search
This section describes how to search and store
channels automatically. Instructions are for both
analogue and digital channels. This may be done in
any of the cases below:
- you have selected
Skip scan
in the Initial setup
Installing channels
Chapter 3
Downloaded from www.vandenborre.be
