Etc.
Advanced
Basics
Getting started
You can configure your TV’s remote control to operate your other devices.
Turn on the device manually.
Switch the remote control mode to a mode
that matches your device. Refer to the
table on the right to select an appropriate
mode.
The indicator lights for 3 seconds each time the
remote control is operated.
Find the remote control code for your
device according to its brand from the
“Remote control codes” list. (Refer to
P. I - XII at the back of this manual.)
Configuring your remote control
TV
STB
AUDIO
BD/DVD
Set the remote control code.
Press and hold
Enter four digit
number
Release the button
Point the remote control at your device, press
and
confirm that your device is turned off. If your device does
not respond, try entering another available code.
Note
If your device does not respond, try all the available codes for the device’s
brand.
If none of the code works, or the brand is not listed, refer to “Using the
search code function” (P. 29).
MODE
Applicable devices
TV
JVC brand only
STB
Cable Set Top Box, Cable/PVR Combination,
Satellite Set Top Box, SAT/PVR Combination
BD/DVD
DVD, Blu-Ray DVD, HD DVD, DVD-R, Home
Theater in Box, TV/DVD Combination
AUDIO
Amplifier, Receiver, Home Theater in Box
Setting your remote
The indicator will unlit for a second after entering the four digit remote
control code number.