JVC LST0601-001B, Руководство для стартапов

Страница: 28 / 32

20
Others
䡵
Actions when Warning Indicator Lights Up
Troubleshooting
Symptom Action
Power cannot be turned on. Check to ensure that the power cable has been plugged in correctly.
Check to ensure that the power switch on the rear panel is switched on.
Camera is not automatically detected. Follow instructions in the camera’s [Instruction Manual] to check the IP
address settings.
When the IP Lease feature is in use, turn off and on the power of the camera
when VR-N1600U/E is started up.
Unable to control using [REC] and [PLAY]. Check to ensure that the operation lock is not turned on.
Images are not recorded in the recording control
mode. Check the [Camera Recording Settings].
Check to ensure that the scheduler is set to online.
Check to ensure that the camera is in the recording control mode.
Unable to play back audio sound. Check to ensure that the audio item of the camera device is set to A Enabled B
in the [Camera Record Setting] menu.
Check to ensure that an audio source is selected in [Audio].
Operation of the unit is disabled. Press and hold the [FUNCTION] button on the front panel, and press the
[OPERATE] button for 7 seconds or longer to shut down the power forcibly.
When the power is forcibly shut down, recorded images that are not archived
may not be properly played back.
The following message appears after the power
is turned on.
A COMS Settings Wrong CMOS Date/ Time Not
Press F1 to Run SETUP Press F2 to load
default values and continue
B
The built-in backup battery is low.
Consult your nearest JVC dealer.
Error Message Action to Take
Free space of HDD less than *GB (*drive) If this message is displayed for the D drive, try to recover using HDD Utility.
If the above does not solve the problem, consult your nearest JVC dealer.
WARNING:HDD (Disk) The HDD seems is no longer serviceable. Replacement is recommended.
Consult your nearest JVC dealer.
HDD was removed Check to ensure that the power of the external HDD is switched on.
Check to ensure that the connecting cable is properly inserted.
If no abnormality is found above, consult your nearest JVC dealer.
WARNING:HDD (Raid) This is a hard disk (when RAID is enabled) warning.
Consult your nearest JVC dealer.
WARNING:HDD(xxx:) Disconnect The NAS drive is disconnected.
Check the operation of NAS.
Check the connection with NAS.
FAN STOP Fan abnormality. Check to ensure that the fan is running.
If the fan is not moving, stop using it.
Otherwise, it may break down.
Consult your nearest JVC dealer.
VR-N1600_Startup_EN_001B.book Page 20 Thursday, August 20, 2009 1:10 PM