JVC LST0601-001B, Руководство для стартапов

Страница: 21 / 32

13
Selecting a Language
The [Language Setting] screen appears when you start up
VR-N1600U/E for the first time. Select the language to use
using the steps below.
1
Select a language
●
Use the [2/ D ] or [10/0/ E ] button to select a language.
2
Use the [SKIP] button to select [OK], followed by
pressing the [16/ENTER] button
●
The A The system is being set up. B message may
appear depending on the setting, and the system is
automatically rebooted.
Memo :
●
Selecting [OK] changes the color of the [OK] characters
from brown to orange.
Automatic Registration of Cameras
After you have started up VR-N1600U/E for the first time and
finished selecting a language, the [Auto Detect] screen
appears.
1
Check to ensure that [Auto Detect] is selected,
followed by pressing the [16/ENTER] button
●
The A Please wait... B message appears.
Memo :
●
The characters of the selected item switches to orange
color.
2
Check to ensure that the camera is detected
●
After the message disappears, a list of detected
cameras is displayed.
●
If all the cameras are not detected, press the [Auto
Detect] button again. If doing so does not solve the
problem, check the connection with the cameras and
the IP address of the cameras.
Memo :
●
Devices other than the cameras may appear in the list.
Uncheck the boxes of these devices.
3
Swap the order of detected cameras
●
Select SORT button using [SKIP] button and press
[16/ENTER] button. The order of detected cameras
can be sorted.
●
The different types of sort buttons include the [IP],
[MAC], [CH], [MAKER], and [MODEL] sort buttons.
●
Select list using [SKIP] button to select [2/D], [10/0/E].
After selecting camera, press
[SKIP]] button to select
[Up], [Down]. When [16/ENTER] is pressed, the order
of cameras will be swapped.
●
Deselect the check box of any camera that you are not
using.
Memo :
●
The camera in the upper position of list order has the first
priority. Camera number will be registered in the list order.
4
Use the [SKIP] button to select [Entry], followed
by pressing the [16/ENTER] button
●
The camera that is automatically detected is registered
in the system.
VR-N1600_Startup_EN_001B.book Page 13 Thursday, August 20, 2009 1:10 PM