background image

16

Basic Operation

This section describes the procedures for viewing live 
images by using the front panel of VR-N1600U/E.

Displaying the [Live] Screen

Press the [LIVE/BROWSE] button when the 

wallpaper *1 or main menu *2 screen is 
displayed.

Press the [LIVE/BROWSE] button when the [Browse] 
screen is displayed.

Press the button to toggle between the [Live] and 
[Browse] screens.

Select a View

For details on the view settings, refer to [INSTRUCRTIONS].

Press the [PTZ/PRESET] button to switch the 

[PTZ/PRESET] indicator to the blinking mode

Press the [PTZ/PRESET] button to switch the [PTZ/
PRESET] indicator between the lit and blinking modes.

Press the [15/ZOOM IN] and [14/ZOOM OUT] 

buttons to select a view

Note :                                                                                

Do not switch the view frequently within a short time 
interval.

When live images do not appear on VN-C625/VN-C655, 
set the password on the camera unit as well as 
VR-N1600U/E again. For details on the setting 
procedures, refer to the [INSTRUCRTIONS] of the camera 
in use and procedures for setting the root password on the 
[Edit device settings] screen in this manual.

The audio setting is set to 

A

No Audio Sources

B

 when you 

return from the setting screen to [Live]. Select the audio 

                                                                                                    

parameters again.

Select a Camera

Select the camera image that you want to view as follows.

Press the [SELECT] button

The [SELECT] indicator lights up.

Enter the camera number using the [1] to [16] 

keypad

When you have selected a camera, the blue bar at the 
top of each live image changes to a lighter blue tone.

Each bar comes with a tri-color square indicator, which 
indicates the following features, as well as characters 
that indicate the operating status of the camera.

Viewing Live Images via 
Front Panel Control

[Live] Screen

*1 Wallpaper Screen

*2 Main Menu Screen

A

B

C

D

[Live] Screen

VR-N1600_Startup_EN_001B.book  Page 16  Thursday, August 20, 2009  1:10 PM

Содержание LST0601-001B

































Отзывы: