JVC LM-10W, Инструкция по эксплуатации

Страница: 8 / 88

6
I
NPUT
SELECT
button
Items
VOLUME/SELECT buttons
– +
PHASE
reddish greenish
(Phase)
CHROMA
lighter deeper
(Chroma)
BRIGHT
darker brighter
(Brightness)
CONTRAST
lower higher
(Contrast)
STATUS indication
(PAL or NTSC)
HOW TO HANDLE BASIC
OPERATIONS
BASIC OPERATION
PICTURE ADJUSTMENT
1. Press the POWER ( ) button to turn on the
power.
Push : Turns the power on. (The Power button lights
green.)
Push again : Turns the power off and activates the stand-by
mode. (The Power button goes out.)
2. Press the INPUT SELECT buttons to choose input.
Select video signals input to terminals on the rear panel. The
selected INPUT SELECT button lights in green.
3. Press the VOLUME/SELECT buttons to adjust the
speaker volume.
Press this button to display the speaker volume level on the
screen.
+ : The Built-in speaker volume is increased. (0
=
50)
– : The Built-in speaker volume is decreased. (50
=
0)
* Screen indication will disappear about 10 seconds after
operating.
1. Press select buttons corresponding to the item
you want to adjust.
The item you select is displayed on the screen.
1
PHASE ( ) : Phase control
2
CHROMA ( ) : Chroma control
3
BRIGHT ( ) : Brightness control
4
CONTRAST ( ) : Contrast control
* Screen indication will disappear about 10 seconds after operating.
About the STATUS indication
●
With the COLOR SYSTEM setting set
to AUTO mode, when you turn on the
power or select inputs, the colour
system indication appears for about
3 seconds on the screen while PAL or
NTSC signals are being detected.
It does not appear when receiving a
B/W signal or when no signal is input.
Refer to page 7 for more information
about COLOR SYSTEM setting and
page 8 for more information about
STATUS indication setting.
Notes:
●
Phase control is effective only in the
NTSC colour system mode.
●
Chroma control is not effective when
receiving B/W or when no signal is
input.
●
When CHROMA is adjusted to “–40,”
the picture becomes less colourful.
●
“NO EFFECT” is displayed (for about
3 seconds) when your selected
function has no effect.
2. Adjust with the VOLUME/SELECT buttons.
Terminals on the rear panel
Video signal input Audio signal input
1
Input A VIDEO A terminal
2
Input B VIDEO B terminal AUDIO terminal
3
Input Y/C VIDEO Y/C terminal
POWER
INPUT SELECT
B A Y/C
VOLUME/SELECT
– +
VOLUME/SELECT
– +
PHASE CHROMA BRIGHT CONTRAST
PAL
VOLUME : 20
0 50
+
–
PHASE : 2 0
– 40 + 40
+
–
LCT0883-001A 01.2.8, 14:03 8