Remote Controller
Remote Controller
Remote controller, RM-RK258, is supplied for
KW-V340BT Region 3
,
KW-V340BTM Region 2
,
KW-V440BT Region 3
,
KW-V440BTM Region 2
.
• For
KW-V340BT Region 4
: To use the remote
controller, purchase optional remote controller,
RM-RK258.
Refer to the instruction manual that comes with the
remote controller.
* Remote sensor
DO NOT expose the remote sensor to bright light (direct sunlight
or artificial lighting).
Preparation
Removing the battery sheet
Pull the battery sheet out from the remote controller
to activate the battery.
Changing the battery of the remote
controller
CR2025 (+side)
• Use a commercially available button battery
(CR2025).
• Insert the battery with the + and – poles aligned
properly.
–
If the effectiveness of the remote controller
decreases, replace the battery.
WARNINGS
•
Do not ingest the battery, as it presents a
chemical burn hazard
The remote controller supplied with this product
contains a coin/button cell battery.
If the coin/button cell battery is swallowed, it can
cause severe internal burns in just 2 hours and can
lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely,
stop using the product and keep it away from
children.
If you think batteries might have been swallowed or
placed inside any part of the body, seek immediate
medical attention.
CAUTION
• Do not leave the battery near fire or under direct
sunlight. A fire, explosion or excessive heat
generation may result.
• Do not set the remote controller in hot places such
as on the dashboard.
• Danger of explosion if Lithium battery is incorrectly
replaced. Replace only with the same or equivalent
type.
41
ENGLISH
04_KW_V340BT_M_Body02.indd 41
04_KW_V340BT_M_Body02.indd 41
18/7/2017 10:26:49 AM
18/7/2017 10:26:49 AM
